Hardware Specifications |
PoE |
802.3af PoE PD, PD Class 3 |
Interface |
Wireless IEEE 802.11b/g/n LAN: 1x 10/100BASE-TX, auto-MDI/MDIX, 802.3af PoE compliant |
Antenna |
Built-in 2T2R, 3dbi antenna |
LED |
Power/position LED (Allowing LED to turn off via software control) |
Button |
Reset button (Press over 5 seconds to reset the device to factory default) |
Material |
Plastic |
Dimensions (Φ x H) |
144 x 33 mm |
Weight |
128 ±5g |
Power Requirements |
802.3af/at PoE, 48-56V DC input, 0.35A (max.) 5V DC input, 1A (max.) |
Power Consumption |
≦ 4.5W (max.) |
Mounting |
Ceiling Mount, Wall Mount |
Wireless Interface Specifications |
Standard |
IEEE 802.11b/g/n 2.4GHz |
Antenna Structure |
802.11n: 2T2R MIMO |
Modulation |
Transmission/emission type: DSSS/OFDM Data modulation type: OFDM: BPSK, QPSK, 16-QAM, 64-QAM, DBPSK, DQPSK, CCK |
Frequency Range |
America -- FCC: 2.412~2.462GHz Europe -- ETSI: 2.412~2.472GHz |
Operating Channels |
America -- FCC: 1~11 Europe -- ETSI: 1~13 |
Channel Width |
802.11n: 20/40MHz |
Data Transmission Rates |
802.11n (HT40): 270/243/216/162/108/81/54/27Mbps 135/121.5/108/81/54/40.5/27/13.5Mbps (dynamic) 802.11n (HT20): 130/117/104/78/52/39/26/13Mbps 65/58.5/52/39/26/19.5/13/6.5Mbps (dynamic) 802.11g: 54/48/36/24/18/12/9/6Mbps (dynamic) 802.11b: 11/5.5/2/1Mbps (dynamic) |
Transmission Distance |
802.11n: up to 70m 802.11g: up to 30m
The estimated transmission distance is based on the theory. The actual distance will vary in different environments. |
Max. RF Power |
802.11n: 17 ± 2dBm 802.11g: 17 ± 2dBm 802.11b: 18 ± 2dBm |
Receiver Sensitivity |
IEEE 802.11b: -92dBm @ 1Mbps; -85dBm @ 11Mbps, PER < 8% IEEE 802.11g: -88dBm @ 6Mbps; -73dBm @ 54Mbps, PER <10% IEEE 802.11n: -90dBm @ MCS8; -70dBm @ MCS15, PER <10% |
Data Rate |
IEEE 802.11b: 1/2/5.5/11Mbps IEEE 802.11g: 6/9/12/18/24/36/48/54Mbps IEEE 802.11n: 300 Mbps in 40MHz mode/150Mbps in 20MHz mode |
TX Power |
Provides 5-level Tx Power Control (100%, 70%, 50%, 35%, 15%) |
Software Features |
Operation Mode |
■ Standalone AP ■ Managed AP |
Wireless Mode |
■ AP (Multiple-SSIDs) ■ Client ■ Repeater (WDS+AP) ■ Universal Repeater (AP+Client) ■ WDS PtP Bridge ■ WDS PtMP Bridge |
Wireless Encryption |
■ WEP (64-/128-bit) encryption security ■ WPA/WPA2 (TKIP/AES) ■ WPA-PSK/WPA2-PSK (TKIP/AES) ■ 802.1x RADIUS Authentication |
Wireless Security |
Wireless MAC address filtering (up to 20 entries) Supports WPS (Wi-Fi Protected Setup) SSID broadcast and hide |
Wireless Advanced |
■ Supports WMM (Wi-Fi Multimedia) for better data transmission of video or on-line demand ■ Supports wireless schedule ■ Multiple SSIDs: up to 5 ■ Wireless Isolation: Enables it to isolate each connected wireless client of a BSSID from communicating with each other ■ IAPP (Inter Access Point Protocol): 802.11f wireless roaming ■ Provides wireless statistics, max. associated station number |
Max. Clients |
Wired: 253 2.4GHz Wireless: 32 |
LAN |
■ Built-in DHCP server supporting static IP address distribution ■ Supports static IP and dynamic IP ■ Supports UPnP ■ Supports 802.1d Spanning Tree |
System Management |
■ Web-based (HTTP) management interface ■ Supports SNTP synchronization ■ Easy firmware upgrade via HTTP/TFTP (through AP controller) ■ Easily locate deployed APs through the LED control ■ Supports scheduled reboot ■ Supports Smart Discovery Utility ■ Supports WAPC series of AP controllers for central management |
Max. WDS Peers |
4 |
IEEE Standards |
IEEE 802.11n (2T2R, up to 300Mbps) IEEE 802.11g IEEE 802.11b IEEE 802.11i IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3x flow control |
Other Protocols and Standards |
CSMA/CA, CSMA/CD, TCP/IP, DHCP, ICMP, SNTP |
Environment & Certification |
Temperature |
Operating: -10 ~ 50 degrees C Storage: -40 ~ 70 degrees C |
Humidity |
Operating: 10 ~ 90% (non-condensing) Storage: 5 ~ 90% (non-condensing) |
Regulatory |
CE, RoHS |