WNAP-W2200UE
300Mbps 802.11n In-Wall Wireless Access Point w/ USB Charger (EU Type, 802.3af/at)
All-in-One Manageable Wi-Fi Solution for Hotel Industry
PLANET WNAP-W2200UE enables the hospitality industry to build a high-speed wireless network with 802.1Q VLAN and PLANET AP controller. Furthermore, it conforms to standard 86-type electrical junction box and IEEE 802.3af/at+, suitable for in-wall installation enabling to integrate the hotel network with its all-in-one interface. The WNAP-W2200UE also provides stable wireless signal that makes access to internet viable in regard to whatever nature of work you are into.
Easy Deployment with PLANET AP Controller
To expand the capability of in-wall AP, PLANET WNAP-W2200UE comes with centralized management, enabling the hospitality industry to deploy multiple APs with a single interface of AP controller and reducing repetitive tasks including AP provisioning, AP status monitoring and AP maintenance. In addition, by connecting with PLANET AP controller, PLANET WNAP-W2200UE helps hoteliers optimize their wireless network within minutes.
Suitable for Any Room Installation without Spoiling Interior Design
Featuring attractive in-wall design, the WNAP-W2200UE can be firmly installed into the wall via the standard 86 x 86 mm European outlet box, which makes electrical wiring invisible and convenient for room installation without affecting the original interior design. It is ideal for hotels, residences, hospitals and more to establish any kind of wireless network.
Comprehensive Wireless Operation Modes
The WNAP-W2200UE supports multiple wireless communication connectivities such as AP, Gateway, Repeater, WDS Point-to-Point (PtP) and WDS Point-to-Multipoint (PtMP), allowing users to comprehensively experience various applications.
Easy to Use Wi-Fi and USB Charger
Having a good night sleep is what we need in the hotel. It is easy to disable the Wi-Fi signal and LED on the front panel of the WNAP-W2200UE. When you don’t need to use wireless LAN, just press the button to close the Wi-Fi and LED. To provide better services for travelers, the WNAP-W2200UE comes with a built-in USB 2.0 charger whose output of 5V DC power can charge any USB compliant mobile devices, e.g., cell phones, iPads, and other handheld devices. Thus, the WNAP-W2200 brings convenience to pedestrians, travelers and other users without having to worry about forgetting to carry an AC adapter.
Ordering Information | |
---|---|
WNAP-W2200UE | 300Mbps 802.11n In-Wall Wireless Access Point with USB Charger |
In-wall Design Ideal for High-density Wireless Network
The WNAP-W2200UE is specifically designed for hotels, offering guests convenient wireless LAN service. With the standard 86 type electrical outlet box installed and PLANET AP controller supported, you don’t need to spend extra time and cost to deploy the wireless network. Its compact and all-in-one interface adapted to the room can match any decor and makes wiring invisible. The WNAP-W2200UE brings convenience to system administrators or machine operators as it comes with centralized management characteristic and comprehensive operation modes to fulfill any application at hotels and residences. No expensive instruments or complex back-end subscriber managed systems are required for deployment.
Ordering Information | |
---|---|
WNAP-W2200UE | 300Mbps 802.11n In-Wall Wireless Access Point with USB Charger |
Standard Compliant Hardware Interface
Secure Network Connection
Multiple Operation Modes and Wireless Features
Easy Deployment and Management
Ordering Information | |
---|---|
WNAP-W2200UE | 300Mbps 802.11n In-Wall Wireless Access Point with USB Charger |
Hardware Specifications | |
---|---|
Interfaces LAN | 1 x 10/100BASE-TX RJ45 port Auto-negotiation and auto MDI/MDI-X |
Interfaces PoE Port | 1 x 10/100Mbps auto MDI/MDI-X RJ45 port (rear panel) ※ IEEE 802.3af/at PD port |
Interfaces USB Port | USB 2.0, Type A, 5V DC, 0.5A output |
Antennas Gain | 2 x 2dBi antenna |
Button | Reset button (Press over 15 seconds to reset the device to the factory default) |
LED Indicators | Wireless |
Dimensions (Φ x H) | 86 x 35 x 86 mm |
Weight | 106 ±5g |
Power Requirements | 48V 0.5A, IEEE 802.3af/at PoE+ |
Power Consumption | < 5W |
Mounting | In-wall mount |
Wireless Interface Specifications | |
Standard | IEEE 802.11b/g/n 2.4GHz |
Media Access Control | CSMA/CA |
Data Modulation | Transmission/emission type: DSSS/OFDM Data modulation type: OFDM: BPSK, QPSK, 16-QAM, 64-QAM, DBPSK, DQPSK, CCK |
Frequency Range | FCC: 2.412~2.462GHz ETSI: 2.412~2.472GHz |
Operating Channels | FCC: 1~11 ETSI: 1~13 |
RF Power | < 20dBm (EIRP) |
Receive Sensitivity | 2.4GHz: 802.11b(1Mbps):-88dBm 802.11b(11Mbps):-85dBm 802.11g(6Mbps):-88dBm 802.11g(54Mbps):-68dBm 802.11n(MCS0/MCS8):-68dBm 802.11n(MCS7/MCS15):-68dBm |
Software Features | |
LAN | Static IP Supports IP-MAC binding |
Wireless Mode | ■ Access Point ■ Gateway ■ Repeater ■ WDS (AP/Bridge/Station) |
Channel Width | 20MHz, 40MHz, |
Encryption Security | 64-/128-bit WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, 802.1X |
Wireless Security | Enable/Disable SSID Broadcast Wireless MAC address filtering User Isolation |
Wireless Advanced | WMM (Wi-Fi Multimedia): 802.11e Wireless QoS Multiple SSIDs: up to 4 Wireless Isolation: Enables to isolate each connected wireless client from communicating with each other Provides wireless statistics |
Max. SSIDs | 4 |
Max. Clients | 64 (20 is suggested, depending on usage) |
Max. WDS Peers | 4 |
Wireless QoS | Supports Wi-Fi Multimedia (WMM) |
Wireless Advanced | Auto channel selection 5-level transmit power control (100%, 75%, 50%, 25%, 12.5%) Client limit control, coverage threshold Wi-Fi channel analysis chart |
Status Monitoring | Device status, wireless client list PLANET Smart Discovery DHCP client table System Log supports remote syslog server |
VLAN | IEEE 802.1Q VLAN (VID: 3~4094) SSID-to-VLAN mapping to up to 4 SSIDs |
Self-healing | Supports auto reboot settings per day/hour |
Management | Remote management through PLANET DDNS/ Easy DDNS Configuration backup and restore Supports UPnP Supports IGMP Proxy Supports PPTP/L2TP/IPSec VPN Pass-through SNMP v1/v2c/v3 support, MIB I/II, Private MIB |
Central Management [1] | Applicable controllers: WAPC-500, WAPC-1000 and Smart AP Control(SAPC) *Remarks[1]: the feature will be supported through firmware/system upgrade. |
Environment & Certification | |
Temperature | Operating: -20 ~ 55 degrees C Storage: -40 ~ 70 degrees C |
Humidity | Operating: 10 ~ 90% (non-condensing) Storage: 5 ~ 95% (non-condensing) |
Regulatory | CE, RoHS |
Ordering Information | |
---|---|
WNAP-W2200UE | 300Mbps 802.11n In-Wall Wireless Access Point with USB Charger |
Ordering Information | |
---|---|
WNAP-W2200UE | 300Mbps 802.11n In-Wall Wireless Access Point with USB Charger |
Ordering Information | |
---|---|
WNAP-W2200UE | 300Mbps 802.11n In-Wall Wireless Access Point with USB Charger |
Tel: 42617 Fax: 88787596 E-mail: info@dotcom-sys.ir
Copyright © Dotcom Systems All rights reserved