Hardware Specifications |
Standard support |
IEEE 802.11a/n Wireless LAN IEEE 802.11i Wireless Security IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Ethernet IEEE 802.3x Flow Control IEEE 802.3af/at Power over Ethernet / PD |
Memory |
32 Mbytes DDR SDRAM 8 Mbytes Flash |
Interface |
Wireless IEEE 802.11a/n, 2T2R LAN: 1 x 10/100Base-TX, Auto-MDI/MDIX, IEEE 802.3af/at PoE/PD port WAN: 1 x 10/100Base-TX, Auto-MDI/MDIX |
Antenna |
N-Type Female connectors x 2 |
Wireless RF Specifications |
Wireless Technology |
IEEE 802.11a IEEE 802.11n |
Data Rate |
IEEE 802.11a: 54, 48, 36, 24, 18, 12, 9 and 6Mbps IEEE 802.11n (20MHz): up to 150Mbps IEEE 802.11n (40MHz): up to 300Mbp |
Media Access Control |
CSMA / CA |
Modulation |
Transmission / Emission Type: OFDM Data modulation type: OFDM with BPSK, QPSK, 16-QAM, 64-QAM |
Frequency Band |
5.180GHz ~ 5.825GHz |
Operating Channel |
5.180GHz |
CH36 |
5.580GHz |
CH116 |
5.200GHz |
CH40 |
5.600GHz |
CH120 |
5.220GHz |
CH44 |
5.620GHz |
CH124 |
5.240GHz |
CH48 |
5.640GHz |
CH128 |
5.260GHz |
CH52 |
5.660GHz |
CH132 |
5.280GHz |
CH56 |
5.680GHz |
CH136 |
5.300GHz |
CH60 |
5.700GHz |
CH140 |
5.320GHz |
CH64 |
5.745GHz |
CH149 |
5.500GHz |
CH100 |
5.765GHz |
CH153 |
5.520GHz |
CH104 |
5.785GHz |
CH157 |
5.540GHz |
CH108 |
5.805GHz |
CH161 |
5.560GHz |
CH112 |
5.825GHz |
CH165 |
*The above 24 channels are defined in theory. The actual application will vary depends on the regulation in different regions and countries. |
RF Output Power |
IEEE 802.11a: 27 ± 1dBm IEEE 802.11n: 24 ± 1dBm |
Receiver Sensitivity |
IEEE 802.11a: -91dBm IEEE 802.11n: -92dBm |
Output Power Control |
3~27dBm |
Software Features |
LAN |
Built-in DHCP server supporting static IP address distributing Supports 802.1d STP (Spanning Tree) |
WAN |
■ Static IP ■ Dynamic IP ■ PPPoE ■ PPTP ■ L2TP ■ IPSec |
Operating Mode |
■ Bridge ■ Gateway ■ WISP |
Firewall |
NAT firewall with SPI (Stateful Packet Inspection) Built-in NAT server supporting Virtual Server and DMZ Built-in firewall with Port / IP address / MAC / URL filtering |
Wireless Mode |
■ AP ■ Client ■ WDS PTP ■ WDS PTMP ■ WDS Repeater (AP+WDS) |
Channel Width |
20MHz / 40MHz |
Wireless Isolation |
Enable it to isolate each connected wireless clients from communicating with each other mutually. |
Encryption Type |
64/128-bits WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, 802.1X |
Wireless Security |
Provides wireless LAN ACL (Access Control List) filtering Wireless MAC address filtering Supports WPS (WIFI Protected Setup ) Enable / Disable SSID Broadcast |
Multiple SSID |
Up to 2 |
Max. Wireless Client |
40 |
Max. WDS AP |
8 |
Max. Wired Client |
60 |
WMM |
Supports Wi-Fi Multimedia |
QoS |
Supports Quality of Service for bandwidth control |
NTP |
Network Time Management |
Management |
Web UI, DHCP Client, Configuration Backup & Restore, Dynamic DNS, SNMP |
Diagnostic tool |
System Log, Ping Watchdog |
Mechanical & Power |
IP Rate |
IP67 |
Material |
Aluminum |
Dimension (W x D x H) |
320 x 27.5 x 320 mm |
Weight |
2.4kg |
Installation |
Pole mounting or Wall mounting |
Power Requirements |
AP: IEEE 802.3af/at PoE / 48V DC input (PoE Injector included) PoE Injector: 100~240VAC |
Power Consumption |
7.68W |
Environment & Certification |
Operation Temperature |
-30~75 Degree C |
Operating Humidity |
10~95% non-condensing |
Regulatory |
CE / RoHS |
Accessory |
Standard Accessories |
■ 48VDC 802.3af PoE injector & Power cord x 1 ■ Mounting Kit x 1 ■ Waterproof RJ-45 Connector Kit x 2 ■ Quick Installation Guide x 1 ■ CD (User’s Manual, Quick Installation Guide) x 1 |