WAP-7500

5GHz 802.11a Wireless LAN Outdoor AP/Extender

 
 
Long Distance Wireless with Excellent Performance
PLANET Technology introduces the latest long distance outdoor wireless LAN solution, the WAP-7500, the outdoor wireless AP/Extender that provides higher transmit power,better performance, and less interference. The WAP-7500 is compatible with IEEE 802.11a to deliver an affordable and reliable rural connectivity solution. The WAP-7500 not only has built-in 23dBi panel Antenna but also reserves one N-Type External Antenna Connector to allow stronger antenna upgrades. Moreover, it adopts TDMA and link aggregation technologies; therefore, its wireless extensibility can reach at least 40km while ensures transmission quality. 

Multiple Operation Modes
The WAP-7500 supports multiple operation modes including Base StationCPERelayPoint to Point, andPoint to Multiple Point to conveniently configure versatile solutions in a wide range of wireless scenarios. The WAP-7500 can have relay setting when two devices connect to each other without affecting wireless performance. It also supports Super mode for fast frames, bursting compression to enhance the throughput.

Advanced Security and Management
In aspect of security, besides 64/128/152 bits WEP encryption, the WAP-7500 integrates WPA / WPA2, WPA-PSK / WPA2-PSK authority to secure and protect your wireless LAN. Furthermore, the WAP-7500 is easily to be managed and configured remotely by its user-friendly Web and SNMP-Based management interface.

Highly Reliable Outdoor Device
The WAP-7500 is quite suitable for wireless LAN applications in widely open space, exposed and long distance locations. With its IP-67 casing protection, the WAP-7500 can perform normally under rigorous weather conditions including heavy rain and wind. With the standard 802.3af Power over Ethernet (PoE) design, the WAP-7500 can be easily applied in the areas where power outlets are not available. The best application of the WAP-7500 is to build outdoor wireless network between buildings on campuses, business, rural areas and etc.
 
 
Ordering Information
WAP-7500 802.11a Dual RF Wireless LAN Outdoor AP - FCC
WAP-7500 802.11a Dual RF Wireless LAN Outdoor AP - ETSI
 
Accessories
ANT-FP23A 5GHz 23dBi Flat Panel Directional Antenna
ANT-OM10A 5GHz 10dBi Omni-directional Antenna
ANT-SE17A 5GHz 16.5dBi Omni-directional Antenna
ANT-SE18A 5GHz 18dBi Flat Panel Antenna
Higher coverage & long distance between LAN connections
The WAP-7500 is a cost-effective outdoor wireless solution for widely open space applications. It is best suitable to outdoor wireless connections between buildings.

With Multiple Antenna choices and adjustable output power controller, the WAP-7500 provides higher coverage and long distance wireless connection and also allows CPE users to easily install and adjust the suitable value in appropriate locations.

**Sincerely suggest matching the same model in outdoor wireless bridge application for getting best performance.
 
 
The WAP-7500 supports multiple operation modes to conveniently configure versatile solutions in a wide range of wireless scenarios.
 
 
 
Ordering Information
WAP-7500 802.11a Dual RF Wireless LAN Outdoor AP - FCC
WAP-7500 802.11a Dual RF Wireless LAN Outdoor AP - ETSI
 
Accessories
ANT-FP23A 5GHz 23dBi Flat Panel Directional Antenna
ANT-OM10A 5GHz 10dBi Omni-directional Antenna
ANT-SE17A 5GHz 16.5dBi Omni-directional Antenna
ANT-SE18A 5GHz 18dBi Flat Panel Antenna
• IEEE 802.11a standard compliant
• Wide delivery of 5GHz wireless network and better connections with less interference
• Dual-Radio: Built-in 23dBi panel Antenna, and one External N-Type Connector 
• Adopts TDMA and link aggregation technologies
• IEEE 802.3af Power over Ethernet compliant
• IP-67 casing protection against rigorous weather conditions
• Wide range of temperature tolerance for low or high temperature environment
• High Transmit Output Power up to 1000mW with multiple adjustable transmit power control
• Multiple operating modes including Base Station, CPE, Relay, Point to Point, and Point to Multiple Point 
• Operates on bridge and relay modes concurrently
• Supports 64/128/152-bit WEP and WPA, WPA2, WPA-PSK, WPA2-PSK Authentication
• Comply with DFS II
• User-friendly Web and SNMP-Based management interface
 
 
Ordering Information
WAP-7500 802.11a Dual RF Wireless LAN Outdoor AP - FCC
WAP-7500 802.11a Dual RF Wireless LAN Outdoor AP - ETSI
 
Accessories
ANT-FP23A 5GHz 23dBi Flat Panel Directional Antenna
ANT-OM10A 5GHz 10dBi Omni-directional Antenna
ANT-SE17A 5GHz 16.5dBi Omni-directional Antenna
ANT-SE18A 5GHz 18dBi Flat Panel Antenna
Hardware Specification
Standard Support IEEE 802.11a
IEEE 802.3u
Network Interface LAN: 1x 10/100Base-TX RJ-45, Auto-MDI/MDIX
IEEE 802.3af Power over Ethernet PD compliant
Interface RS-232 (COM): 1x RS-232 (UART) in RJ45 Form Factor
IP Level 67
Power IEEE 802.3af Power over Ethernet (Output 20Watts, 48V/0.4A)
Wireless Interface Specification
Wireless Technology IEEE 802.11a compliant
Data Rates 802.11a: 54/48/36/24/18/12/9/6Mbps
Antenna Internal:23dBi (Default for FCC)
     HPBW (Horizontal): 10 degree
     HPBW (Vertical): 10 degree
External:1x N-type Connector 
Frequency Range FCC:
  5.725 ~ 5.850 GHz
CE:
  5.470 ~ 5.600 GHz
  5.660 ~ 5.725 GHz
(Programmable for different country regulations)
Channel Spacing 40/20/10/5 MHz
RF Output Power 24dBm at Radio for FCC (Band 4)
30dBm EIRP for ETSI 301 893 (Band 3) 
(Controllable for different country regulations)
Receiver Sensitivity 6Mbps: -90dBm
54Mbps: -73dBm
Modulation OFDM with BPSK, QPSK, 16-QAM, 64-QAM
Management Feature
Management Web-Based Management (Secure SSL)
Command Line Interface(SSH)
SNMPv2
Windows-Based Utility
Firmware Upgrade Web / Windows management tool
Operation mode Base Station
CPE
Relay
Point to Point
Point to Multiple Point
Radio Bandwidth Control 5/10/20/40MHz
Super Mode Enable it for Fast Frames, Bursting Compression
TDM Coordination Traffic Management
Link Aggregation Throughput Enhancement
TDMA For long distance transmission
Distance in Meters Auto ACK-Time adjustment
Wireless Isolation Yes
Management Statistics Wireless and Ethernet
Link Test Self-Wireless Connection test
Wireless Security 64/128/152-bit WEP, WPA, WPA-PSK, WPA2, WPA2-PSK
User Authentication HTTPS login
802.11i (WPA, WPA2)
802.1x (EAP-TLS / TTLS)
802.1Q VLAN
Remote RADIUS server authentication 
Output Power Control 5 levels adjustable: 
Full = 24dBm
50% = 21dBm
25% = 18dBm
12.5% = 15dBm
Min. = 12dBm
WMM 802.11e WMM (Wi-Fi Multimedia)
STP Spanning Tree Protocol with Fast Forwarding
GPS Coordinate Setting The GPS Coordinate Setting can mark the latitude and longitude of the device.
Diagnostic tool System Log
Environment
Operating Temperature -30 ~ 70 Degree C
Operating Humidity 10 ~ 95% non-condensing
Certification
EMI FCC: part 15, subpart B&C
CE: EN301 893(5G)
EMS CE EN301 489-1/17
Safety EN60950
DFS CE:EN301893 V1.5.1 (DFS-3)
Accessory
Standard Accessories 48V / 0.4A 802.3af PoE injector x 1
Universal AC Power cord x 1
Grounding Wire with screw x 1
Mounting Kit x 1
Water Proof RJ-45 Connector Kit x 1
 
Ordering Information
WAP-7500 802.11a Dual RF Wireless LAN Outdoor AP - FCC
WAP-7500 802.11a Dual RF Wireless LAN Outdoor AP - ETSI
 
Accessories
ANT-FP23A 5GHz 23dBi Flat Panel Directional Antenna
ANT-OM10A 5GHz 10dBi Omni-directional Antenna
ANT-SE17A 5GHz 16.5dBi Omni-directional Antenna
ANT-SE18A 5GHz 18dBi Flat Panel Antenna

Datasheet

Date Version Description Download
2012-02-17 1.0 for Egypt area
2011-04-08 1.0 WAP-7500
 

Quick Guide

Date Version Description Download
2011-03-23 1.0 Initial Release
 

User's Manual

Date Version Description Download
2011-03-23 1.0 Initial Release
 

EC Declaration

Date Version Description Download
2011-08-08 1.0 Initial Release
 
 
Ordering Information
WAP-7500 802.11a Dual RF Wireless LAN Outdoor AP - FCC
WAP-7500 802.11a Dual RF Wireless LAN Outdoor AP - ETSI
 
Accessories
ANT-FP23A 5GHz 23dBi Flat Panel Directional Antenna
ANT-OM10A 5GHz 10dBi Omni-directional Antenna
ANT-SE17A 5GHz 16.5dBi Omni-directional Antenna
ANT-SE18A 5GHz 18dBi Flat Panel Antenna