VC-205-KIT

PoE over Coaxial Extender Kit – Transmitter / Receiver

PLANET VC-205-KIT PoE over Coaxial Extender Kit is designed to extend IP Ethernet transmission and inject power over an existing coaxial cable for distance up to 1000m (3280ft) into PoE IP camera, PoE wireless AP and any 802.3af/at complied powered device (PD).

The VC-205-KIT consists of a Transmitter and Receiver set which can work in pair without any power adapter anywhere on your network infrastructure. It is perfect solution for sending IP Video links and power to remote PoE IP camera installation that is beyond the 100-meter distance limit of Ethernet.

The solution contains two brand-new products:
　　■ VC-205PT: 1-Port 10/100TX PoE PD + 1-Port BNC PoE over Coaxial PSE Extender – Transmitter
　　■ VC-205PR: 1-Port 10/100TX PoE PSE + 1-Port BNC PoE over Coaxial PD Extender – Receiver
Models
VC-205PT
VC-205PR
PoE over Coax. Extender
Transmitter
Receiver
Power Input
(Optional)
PoE
RJ-45: 802.3af/at PoE In
UTP cable, up to 100m
BNC: PoE over Coaxial In
Coaxial cable, up to 1km
DC
DC Jack: 52~56V DC In
--
Power Output
PoE
BNC: Power over Coaxial Out
Coaxial cable, up to 1km
RJ-45: 802.3af/at PoE out
UTP cable, up to 100m


Convenient Installation
The VC-205-KIT is plug and play devices which can extend the distance of existing application without the need of configuring by software and is also compliant with all kinds of network protocols. Moreover, the rich diagnostic LEDs on the front panel show the operating status of the individual port and the whole system, enabling the administrator efficiently manage the network.

Power over Coaxial
Based on IEEE 802.3at High Power over Ethernet and up to 25 watts of power output, PLANET PoE over coaxial extender kit solution eliminates the need for additional remote site power while allowing a single PoE source, such as a PoE switch, to provide power to both transceivers and the camera at long range. This feature eliminates the need for local and remote site power supplies.

IEEE 802.3at/af PoE Injector and PoE PD in One Box Design
The VC-205PR, which power sourcing from the transmitter VC-205PT, is a Single-port, 802.3at High Power over Ethernet Injector providing maximum up to 30 watts of power output over Ethernet cable which allows data and power to transmit simultaneously through the cable to PoE PD (Powered Device).
Stable Operating Performance under Difficult Environments
The VC-205PT and VC-205PR extender kit is the perfect solution for extended distance data and power transmission for warehouses, parking lots, campuses, casinos, and many more. They can operate stably under temperature range from -40 to 75 degrees C which enables the users to conveniently apply the device in almost any location of the network.
Ordering Information
VC-205-KIT Power over Coaxial Extender Kit
Applications of VC-205-Kit Power over Coaxial Extender Kit
The VC-205-KIT can split into two different kinds of combinations. The VC-205PT can be powered by either external DC power adapter or high power PoE switch. The power output of the VC-205PR is a PoE output to the PoE Power Devices (PD).

Type 1 – VC-205PT with 52~56V power adapter and VC-205PR as PoE power output
CPE
CO
VC-205PT
VC-205PR
Power Input
Power adapter with 52~56V DC in
BNC with DC power over coaxial input
Power Output
BNC with DC power over coaxial output
RJ-45 with 802.3at/af PoE output
Type 2 – VC-205PT with PoE power input and VC-205PR as PoE power output
CPE
CO
VC-205PT
VC-205PR
Power Input
RJ-45 with 802.3at/af PoE input
BNC with DC power over coaxial input
Power Output
BNC with DC power over coaxial output
RJ-45 with 802.3at/af PoE output
Ordering Information
VC-205-KIT Power over Coaxial Extender Kit
Physical Port
    • VC-205PT
- Copper: 1 x 10/100Base-TX (802.3af/at PoE In)- BNC: Power over coaxial trasnmitter
    • VC-205PR
- Copper: 1x 10/100Base-TX (802.3af/at PoE Out)- BNC: Power over coaxial receiverPower over Ethernet
  • Eliminates power cabling with PoE over Coaxial
  • Ethernet over Coaxial up to 1km with 5C2V/RG6 75Ω cable
  • Complies with IEEE 802.3af / IEEE 802.3at Power over Ethernet on RJ-45 ports
  • Supports PoE Power up to 30.8 watts (vary on Power Source and Coaxial Distance)
  • Auto detects powered device (PD) (VC-205PR)
Layer 2 Features
  • Supports auto-negotiation and 10/100Mbps half / full duplex mode
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
VDSL2 Features
  • Defines asymmetric (Band Plan 998) for the transmission of upstream and downstream signals
Industrial Case / Installation
  • Supports extensive LED indicators for network diagnostics
  • IP30 metal case protection
  • Compact size, DIN rail and wall mount design
  • Power Input: external DC or PoE power input (VC-205PT)
  • Power Output: PoE power output (VC-205PR)
  • Supports EFT protection 2000V DC for power line
  • Supports 2000V DC Ethernet ESD protection
  • -40 to 75 degrees C operating temperature
Ordering Information
VC-205-KIT Power over Coaxial Extender Kit
Hardware Specifications
Interface VC-205PT:
　■ Copper
　　• 10/100Base-TX RJ-45
　　• Auto-negotiation/ Auto-MDI/MDI-X
　　• 802.3at/af PoE Input
　■ Coaxial
　　• BNC, female
　　• Power over Coaxial Output
　■ DC Socket(Optional)
　　• 52~56V DC Input
VC-205PR:
　■ Copper
　　• 10/100Base-TX RJ-45
　　• Auto-negotiation/ Auto-MDI/MDI-X
　　• 802.3at/af PoE Output
　■ Coaxial
　　• BNC, female
　　• Power over Coaxial Input
LED Indicators VC-205PT:
LED is Green in Color:
System: PoE:
■ PWR ■ PoE IN
VDSL2: Ethernet:
■ LNK/ACT ■ LNK/ACT
■ CPE ■ 100

VC-205PR:
LED is Green in Color:
System PoE:
■ PWR ■ PoE IN
VDSL2: ■ PoE Out
■ LNK Ethernet:
■ CPE ■ LNK/ACT
■ 100
ESD Protection 2KV DC
EFT Protection 2KV DC
Enclosure IP30 metal case
Installation Wall mount or DIN rail with optional kit
Dimensions (W x D x H) 94 x 70.3x 39.2 mm
Weight VC-205PT: 283g
VC-205PR: 284g
Power Requirements VC-205PT:
　■ RJ-45 PoE Input: 802.3at/af 44~57V DC
　■ DC Input: 52~56V DC
VC-205PT: BNC Power over Coaxial Input: 44~57V DC
Power over Ethernet/Coaxial
PoE Standard IEEE 802.3at Type 2
IEEE 802.3af
PSE Interface VC-205PT:
　■ BNC
　■ 44~57V DC
　　(Depending on what the DC/PoE Power Input is)
VC-205PR:
　■ RJ-45
　■ 48~56V DC, 600mA max.
　■ End-Span, Pin 1/2(+), 3/6(-)
PD Interface VC-205PT:
　■ RJ-45, both mid-span and end-span
　■ Input Range: 44~57V DC
VC-205PR:
　■ BNC
　■ Input Range: 44~57V DC
Max. PoE Budget Power Input by PoE
VC-205PT
　■ BNC : 25 watts
VC-205PR
　■ RJ-45 : 20 watts

Power Input by DC
VC-205PT
　■ BNC : 30 watts
VC-205PR
　■ RJ-45 : 30 watts
Performance* (Downstream / Upstream)**
Distance
Data Rate
VC-205PR PoE Output
Asymmetric Mode
VC-205PT W/DC IN
VC-205PT W/PoE+ IN
200m
100/60 Mbps
20W
13W
400m
95/55 Mbps
16W
11W
600m
90/50 Mbps
12W
10W
800m
85/45 Mbps
7W
6W
1000m
70/35 Mbps
5W
4W
1200m
60/25 Mbps
-
-
Standards Conformance
Standards Compliance IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3af Power over Ethernet (802.3at Type 1)
IEEE 802.3at Power over Ethernet Plus (802.3at Type 2)
Regulation Compliance FCC Part 15 Class A, CE
Environment
Temperature
Operating: -40 ~ 75 degree C
Storage: -40 ~ 75 degrees C
Humidity
Operating: 5 ~ 95% (Non-condensing)
Storage: 5 ~ 95% (Non-condensing)
* The actual data rate will vary on the quality of the copper wire and environment factors.
**Default Downstream VC-205PT to VC-205PR; Upstream VC-205PT to VC-205PR.
Ordering Information
VC-205-KIT Power over Coaxial Extender Kit

Datasheet

Date Version Description Download
2013-08-09 1.0 VC-205-KIT

User's Manual

Date Version Description Download
2013-07-26 1.0 Initial release.
Ordering Information
VC-205-KIT Power over Coaxial Extender Kit