MGSW-24160F

16-Port 100/1000Base-X SFP + 8-Port 10/100/1000Base-T L2/L4 Managed Metro Ethernet Switch

Multiple SFP Fiber Port Switch for Growing Long-Reach Networking of Enterprise, Telecoms and Campus
The MGSW-24160F is implemented with advanced management functions, and provides 16 100/1000Mbps dual speed SFP Fiber ports and 8 10/100/1000Mbps TP ports delivered in a rugged strong case. It is capable of providing non-blocking switch fabric and wire-speed throughput as high as 48 Gbps in the temperature range from -10 to 60 Degree C without any packet loss and CRC error, which greatly simplifies the tasks of upgrading the enterprise LAN for catering to increasing bandwidth demands. The MGSW-24160F is specially designed for service provider to deliver profitable Ethernet network. Furthermore, it adopts “Front Access” design for easy technician wiring and maintenance of the MGSW-24160F in the cabinet.

AC and DC Redundant Power to Ensure Continuous Operation
The MGSW-24160F helps the network administrators efficiently manage the unexpected network situations by providing Digital Input and Digital Output for external alarm device on the front panel. The Digital Input can be used to detect and log the status of the external devices such as door intrusion detector. The Digital Output could be used to send alarm whenever the MGSW-24160F has port link down or power failure.
Cost-effective IPv6 Managed Gigabit Switch Solution
Nowadays, the need of IP Address increases owing to lots of electronic products or mobile devices able to access to the Internet. However, the current IPv4 network infrastructure is not capable enough to provide IP Address to each single users/Clients. The situation forces the ISP to build up the IPv6 (Internet Protocol version 6) network infrastructure speedily. To fulfill the demand, the MGSW-24160F supports both IPv4 and IPv6 management functions. It can work with both original IPv4 network structure and the new network structure (IPv6) in the future. With friendly management interface and plenty of management functions included, the MGSW-24160F Managed Gigabit Switch is the best choice for you to build the IPv6 FTTx edge service and for Industrial Ethernet applications to connect with IPv6 network.

Layer 2 / Layer 4 Full-functioned Managed Switch for Building Automation Networking
The MGSW-24160F Managed Metro Ethernet Switch is ideal for applications in the factory data centers and distributions. It provides advanced Layer 2 to Layer 4 data switching and redundancy, Quality of Service traffic control, network access control and authentication, and Secure Management features to protect customer’s industrial network connectivity with reliable switching recovery capability that is suitable for implementing fault tolerant and mesh network architectures.

Powerful Security
The MGSW-24160F offers comprehensive Access Control List (ACL) for enforcing security to the edge. Its protection mechanisms also comprise of Port-Based 802.1x and MAC-Based user and device authentication. The port-security function effectively limits the numbers of clients pass through, so that network administrators can now construct highly secured corporate networks with time and effort considerably less than before.
Ordering Information
MGSW-24160F 16-Port 100/1000Base-X SFP + 8-Port 10/100/1000Base-T L2/L4 Managed Metro Ethernet Switch
Optimized Design for Metropolitan Area Network
By means of improving the technology of Optical Fiber Ethernet with high-flexible, high-extendable and easy-installation features, the MGSW-24160F offers up to 1Gbps data exchange speed via Optical Fiber interface and the transmission distance extends to 120km. The MGSW-24160F is the ideal solution for service providers such as ISP and Telecom to build Metropolitan Area Network (MAN) based on Fiber technology to the WAN Internet Service.
Excellent Solution of Core / Department Switch
The MGSW-24160F is an excellent choice of core layer switch for a Gigabit network. With 16 100/1000Base-X SFP ports + 8 10/100/1000Base-T ports, the MGSW-24160F is able to connect up to 24 edge switches in the Ethernet environment. Moreover, it also provides 48 Gigabit per second switch fabric and high bandwidth for backbone connection.
Enhanced Protection via Digital Input and Digatal Output Features
The MGSW-24160F features digital input and digital output functions that greatly help the administrator efficiently react to the emergency events. The digital input can be setup to indicate urgent events and send the messages or alarm to the network system once the urgent event detected by the external device such as door or windows open detecter. The digital output function can define the immediate response such as port failed or power failed to the related urgent events.
Ordering Information
MGSW-24160F 16-Port 100/1000Base-X SFP + 8-Port 10/100/1000Base-T L2/L4 Managed Metro Ethernet Switch

Physical Port
　　• 16 100/1000Base-X SFP mini-GBIC slots from port 9 to port 24
　　• 8-Port 10/100/1000Base-T Gigabit Ethernet RJ-45
　　• RS-232 DB9 console interface for Switch basic management and setup

Hardware Conformance
　　• 36 to 72V DC, redundant power with polarity reverse protect function
　　• -10 to 60 Degree C operating temperature
　　• 19-inch Rack-mountable
　　• Relay alarm for port breakdown, power failure
　　• Two Thermal FAN built in

Layer 2 Features
　　• Prevents packet loss with back pressure (Half-Duplex) and IEEE 802.3x PAUSE frame flow control
　　　(Full-Duplex)
　　• High performance of Store-and-Forward architecture, broadcast storm control and runt/CRC
　　　filtering eliminate erroneous packets to optimize the network bandwidth
　　• Storm Control support
　　　　–Broadcast / Multicast / Unknown-Unicast
　　• Supports VLAN
　　　　–IEEE 802.1Q Tagged VLAN
　　　　–Up to 255 VLANs groups, out of 4094 VLAN IDs
　　　　–Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
　　　　–Private VLAN Edge (PVE)
　　　　–Voice VLAN
　　• Supports Spanning Tree Protocol
　　　　–STP, IEEE 802.1D Spanning Tree Protocol
　　　　–RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
　　　　–MSTP, IEEE 802.1s Multiple Spanning Tree Protocol, spanning tree by VLAN
　　　　–BPDU Guard
　　• Supports Link Aggregation
　　　　–802.3ad Link Aggregation Control Protocol (LACP)
　　　　–Cisco ether-channel (Static Trunk)
　　　　–Maximum 12 trunk groups, up to 16 ports per trunk group
　　　　–Up to 32Gbps bandwidth (Duplex Mode)
　　　　–Provides Port Mirror (many-to-1)
　　• Port Mirroring to monitor the incoming or outgoing traffic on a particular port

Quality of Service
　　• Ingress Shaper and Egress Rate Limit per port bandwidth control
　　• 4 priority queues on all switch ports
　　• Traffic classification:
　　　　–IEEE 802.1p CoS
　　　　–TOS / DSCP / IP Precedence of IPv4/IPv6 packets
　　　　–IP TCP/UDP port number
　　　　–Typical network application
　　• Strict priority and Weighted Round Robin (WRR) CoS policies
　　• Supports QoS and In/Out bandwidth control on each port
　　• Traffic-policing policies on the switch port
　　• QoS Control List Wizard makes QoS creation and configuration easier and more quickly
　　• DSCP remarking

Multicast
　　• Supports IGMP Snooping v1, v2 and v3
　　• Querier mode support
　　• IGMP Snooping port filtering
　　• Multicast VLAN Registration (MVR) support

Security
　　• IEEE 802.1x Port-Based / MAC-Based network access authentication
　　• Built-in RADIUS client to co-operate with the RADIUS servers
　　• TACACS+ login users access authentication
　　• RADIUS / TACACS+ users access authentication
　　• IP-Based Access Control List (ACL)
　　• MAC-Based Access Control List
　　• Source MAC / IP address binding
　　• DHCP Snooping to filter un-trusted DHCP messages
　　• Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
　　• IP Source Guard prevents IP spoofing attacks
　　• Auto DoS rule to defend DoS attack
　　• IP address access management to prevent unauthorized intruder

Management
　　• Switch Management Interfaces
　　　　–Console / Telnet Command Line Interface
　　　　–Web switch management
　　　　–SNMP v1, v2c, and v3 switch management
　　　　–SSH / SSL secure access
　　• Four RMON groups (history, statistics, alarms, and events)
　　• IPv6 IP Address / NTP / DNS management
　　• Built-in Trivial File Transfer Protocol (TFTP) client
　　• BOOTP and DHCP for IP address assignment
　　• Firmware upload / download via HTTP / TFTP
　　• DHCP Relay and Option 82
　　• User Privilege levels control
　　• NTP (Network Time Protocol)
　　• Link Layer Discovery Protocol (LLDP) Protocol
　　• Cable Diagnostic technology provides the mechanism to detect and report potential cabling issues
　　• Reset button for system reboot or reset to factory default
　　• PLANET Smart Discovery Utility for deploy management
　　• ICMPv6

Redundant Power System
　　• 100~240V AC / 36~72V DC Dual power redundant
　　• Active-active redundant power failure protection
　　• Backup of catastrophic power failure on one supply
　　• Fault tolerance and resilience

Digital Input / Digital Output
　　• 2 Digital Input (DI)
　　• 2 Digital Output (DO)
　　• Integrates sensors into auto alarm system
　　• Transfers alarm to IP network via email and SNMP trap
Ordering Information
MGSW-24160F 16-Port 100/1000Base-X SFP + 8-Port 10/100/1000Base-T L2/L4 Managed Metro Ethernet Switch
Hardware Specification
SFP/mini-GBIC Slots 16 1000Base-SX/LX/BX SFP interfaces, from port 9 to port 16
Compatible with 100Base-FX SFP
Copper Ports 8 10/ 100/1000Base-T RJ-45 Auto-MDI/MDI-X ports
Console Port 1 x RS-232 DB9 serial port (115200, 8, N, 1)
Switch Processing Scheme Store-and-Forward
Switch Throughput@64Bytes 35.7Mpps
Switch Fabric 48Gbps / non-blocking
Address Table 8K entries, automatic source address learning and ageing
Share Data Buffer 1392 kilobytes
Flow Control IEEE 802.3x Pause Frame for Full-Duplex
Back pressure for Half-Duplex
Jumbo Frame 10Kbytes
Reset Button < 5 seconds: System reboot
> 10 seconds: Factory Default
Dimension (W x D x H) 440 x 200 x 44.5 mm, 1U high
Weight 3kg
LED Power, DC1, DC2, Fault, Link/Act and speed per Gigabit port
Power Consumption Max. 45 Watts / 154.4 BTU (AC)
Power Requirement – AC AC 100~240V, 50/60Hz 0.75A
Power Requirement – DC -36V DC @ 1.1A, Range: -36V ~ -72V DC
DI/DO 2 Digital Input (DI): Input Load to 24V DC, 10mA max.
2 Digital Output (DO): Open collector to 24V DC, 100mA max. load
Layer 2 Function
Port Configuration Port disable / enable
Auto-Negotiation 10/100/1000Mbps full and half duplex mode selection
Flow Control disable / enable
Bandwidth control on each port
Power saving mode control
Port Status Display each port’s speed duplex mode, link status, Flow control status
Auto negotiation status, trunk status
VLAN 802.1Q Tagged Based VLAN
Port-Based VLAN
Q-in-Q
Private VLAN Edge (PVE)
Up to 256 VLAN groups, out of 4094 VLAN IDs
Port Trunking IEEE 802.3ad LACP / Static Trunk
12 groups of 16-Port trunk support
QoS Traffic classification based, Strict priority and WRR
4-level priority for switching
　- Port Number
　- 802.1p priority
　- 802.1Q VLAN tag
DSCP/TOS field in IP Packet Policy-Based QoS
IGMP Snooping IGMP (v1/v2/v3) Snooping, up to 255 multicast Groups
IGMP Querier mode support
Access Control List IP-Based ACL / MAC-Based ACL
Up to 256 entries
Management
Basic Management Interfaces Console, Telnet, Web Browser, SNMPv1, v2c and v3
Secure Management Interface SSH, SSL, SNMP v3
SNMP MIBs RFC-1213 MIB-II
IF-MIB
RFC-1493 Bridge MIB
RFC-1643 Ethernet MIB
RFC-2863 Interface MIB
RFC-2665 Ether-Like MIB
RFC-2819 RMON MIB (Group 1)
RFC-2737 Entity MIB
RFC-2618 RADIUS Client MIB
RFC-2933 IGMP-STD-MIB
RFC3411 SNMP-Frameworks-MIB
IEEE 802.1X PAE
LLDP
MAU-MIB
Standards Conformance
Regulation Compliance FCC Part 15 Class A, CE
Standards Compliance IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX/100Base-FX
IEEE 802.3z Gigabit SX/LX
IEEE 802.3ab Gigabit 1000T
IEEE 802.3x Flow Control and Back pressure
IEEE 802.3ad Port trunk with LACP
IEEE 802.1D Spanning tree protocol
IEEE 802.1w Rapid Spanning tree protocol
IEEE 802.1s Multiple Spanning tree protocol
IEEE 802.1p Class of service
IEEE 802.1Q VLAN Tagging
IEEE 802.1x Port Authentication Network Control
IEEE 802.1ab LLDP
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 2068 HTTP
RFC 1112 IGMP version 1
RFC 2236 IGMP version 2
Stability IEC60068-2-32 (Free fall)
IEC60068-2-27 (Shock)
IEC60068-2-6 (Vibration)
Environment
Operating Temperature: -10 ~ 60 Degree C for DC power input
　　　　　　　-10 ~ 60 Degree C for AC power input
Relative Humidity: 5 ~ 95% (non-condensing)
Storage Temperature: -10 ~ 70 Degree C
Relative Humidity: 5 ~ 95% (non-condensing)
Ordering Information
MGSW-24160F 16-Port 100/1000Base-X SFP + 8-Port 10/100/1000Base-T L2/L4 Managed Metro Ethernet Switch

Datasheet

Date Version Description Download
2012-05-04 1.0 MGSW-24160F

Firmware

Date Version Description Download
2012-05-31 1.0b120524 Initial release.

Quick Guide

Date Version Description Download
2012-04-13 1.0 Initial Release.

User's Manual

Date Version Description Download
2012-04-13 1.0 Initial Release.

EC Declaration

Date Version Description Download
2012-04-13 1.0 Initial Release.
Ordering Information
MGSW-24160F 16-Port 100/1000Base-X SFP + 8-Port 10/100/1000Base-T L2/L4 Managed Metro Ethernet Switch