VPA-100

SIP Public Announcement Adapter with PoE

 
 
New Audio Control System
PLANET VPA-100 audio control system comes with the existing IP PBX to provide unidirectional and bidirectional audio for broadcasting. An announcement can be made via the VPA-100, simply by making a call from an IP phone in the handset, headset, or hands-free mode. Its efficient 3.5-watt amplifier provides loud speaker coverage for the entire room or floor space.
 
 
User-friendly Control
The VPA-100 provides four programmable output ports to control power on or power off. It usually controls them via web. When an IP phone is dialed to the VPA-100, the user can also control these ports via keypad of the IP phone. It allows the user to control these devices anytime, anywhere.
 
 
Standard Compliance
Compliant with the Session Initiation Protocol 2.0 (RFC 3261), the VPA-100 is able to function with PLANET or any third-party SIP 2.0 compliant VoIP products.
 
 
Adjustable to Suit User's Application
The VPA-100 can be powered via a power adapter or power over Ethernet cable, meaning the user can select either of the available power sources for his convenience. The volume of output, speaker input and handset input via web UI can be adjusted to make the announcement in the environment just right. It can be set up in all facilities, such as rooms, hallways, office floors, and more.
 
Full VoIP Communication
Several VPA-100 units can be connected to each other over a 100-meter cabling via a PoE switch. They can also be optionally installed on walls or ceilings. If the IP PBX supports paging and intercom, one IP phone can make calls to many VPA-100 units at the same time.
 
 
Ordering Information
VPA-100 SIP Public Announcement Adapter with PoE
Universal IP Paging System of the VPA-100
The VPA-100 registers an extension to IP PBX and into paging system. It can remotely control by turning on/off devices via IP phone or smart phone panel button. Connected loudspeaker allows any IP phone broadcast voice via the VPA-100. It also supports the handset mode for the bi-directional broadcast.
 
 
Ordering Information
VPA-100 SIP Public Announcement Adapter with PoE
Highlights
  • Compatible with SIP (RFC3261) and most modern IP PBX systems
  • Compliant with IEEE 802.3af PoE interface for flexible deployment
  • Paging and intercom function strengthens work efficiency
  • Four digital output ports to turn on/off alarm light, door locker etc
  • Audio output for position: 3.5mm audio interface and loud speaker

Advantageous Applications
  • Acoustic Echo Cancellation and noise suppression
  • Full duplex and speaker mode
  • Adaptive jitter buffer
  • Extra LAN port available for connection to a device for network expansion

SIP Applications
  • Auto answer
  • Paging and intercom
  • Voice algorithms: G.711 A-law and μ-law; G.722/G.722.1/G.722.2, G.723, G.726, G.729, iLBC

Call Control Features
  • Volume adjustment
  • Audio output mode: speaker and handset
  • Incoming ring
  • Full-duplex

Network Features
  • Static IP and DHCP client on WAN
  • Main DNS server

Maintenance and Management
  • Integrated web server provides web-based administration and configuration
  • Firmware upgrade via HTTP
  • Remote control digital output via Web UI and phone key
 
Ordering Information
VPA-100 SIP Public Announcement Adapter with PoE
Hardware
Voice Microphone: 3.5mm standard interface
Speaker: 3.5mm standard interface (Mono)
Loudspeaker: SPK+, SPK- (Max. 26db)
Physical Interfaces Two 10/100BASE-TX RJ45 Ethernet ports 
LAN1: Connects to internet and provides PoE function(IEEE 802.3af)
LAN2: Connects to other devices for network expansion

Microphone/speaker: 3.5mm connector 

Terminal block for loudspeaker, power supply, ground and output ports
5VDC power supply: Max. 200mA
3.3VDC power supply: Max. 500mA
Port 1-4 output voltage/current: 3.3V/8mA 
Reset button
Protocols and Standard
Voice Flood Control Protocol: UDP
Voice algorithms:
- G.711 A-law and μ-law
- G.722/G.722.1/G.722.2
- G.723
- G.726
- G.729
- iLBC
Echo cancellation noise suppression (ECN)
Adaptive jitter buffer
Features
Telephony Features One voice line
Auto answer
Volume adjustment: output, handset input and speaker input
Full-duplex
Incoming ring
Audio output mode: speaker and handset
Environment
Power Requirements 5V DC, 1A 
IEEE 802.3af PoE class 3
Max. 2W
Operating Temperature 0 ~ 40 degrees C
Operating Humidity 10 ~ 95% (non-condensing)
Weight 344g
Dimensions (W x D x H) 117 x 84 x 31 mm
Emission CE, FCC
Connectors Two 10/100BASE-TX RJ45 Ethernet ports
Two 3.5mm phone connectors
DC power jack 
Terminal block
Ordering Information
VPA-100 SIP Public Announcement Adapter with PoE

Datasheet

Date Version Description Download
2016-10-07 1.0 VPA-100

Quick Guide

Date Version Description Download
2016-03-29 1.0 Initial Release

User's Manual

Date Version Description Download
2016-04-18 1.0 Initial Release
Ordering Information
VPA-100 SIP Public Announcement Adapter with PoE