Video |
Video System |
NTSC / PAL auto detection |
Video Input Level |
1.0 Vp-p Composite, 75 Ohm Balanced |
Video Input |
4CH, BNC |
Video (Spot) Output |
1CH, BNC |
VGA Output |
1280*1024 |
Audio |
Audio Input |
1CH, RCA |
Audio Output |
1CH, RCA |
Terminal |
Sensor |
4 Inputs / 1 Output |
RS-485 Interface |
Pan / Tilt / Zoom Camera |
Control Interface |
USB Mouse, Remote Controller, Front Panel |
HDD |
SATA Hard Disk x1 (Max. 2TB) |
Display |
Division |
1 / 4 |
Zoom |
2X ~ 8X |
OSD |
Graphic OSD |
Picture-in-Picture |
Yes |
Recording |
Compression |
H.264 |
Resolution |
720x480, 720x240, 360x240 (NTSC) 720x576, 720x288, 360x288 (PAL) |
Frame Rate |
120, 120, 120 (NTSC) 100, 100, 100 (PAL) |
Quality |
Highest / High / Normal / Low / Lowest |
Record Mode |
Manual, Schedule, Event (Motion Detection, Sensor, Video Loss) |
Motion Detection |
Selectable motion detection area for each individual camera Sensitivity: 5 levels |
Pre-alarm |
16 MB (10 sec) |
Post-alarm |
1-16 sec |
Video Preservation |
Yes |
Playback |
Search Mode |
Time, Event |
Speed |
Fast forward/backward 2X/4X/8X/16X/32X/64X Slow forward/backward 1/2X,1/4X,1/8X,1/16X Play / Pause |
Network |
Interface |
Web browser, client software, 3G mobile phone |
Service |
TCP/ IP, SMTP, HTTP, DHCP, DDNS, PPPoE |
Backup |
External |
USB 2.0 : USB Flash |
Network |
Client software |
Others |
Monitoring |
Software Watchdog |
Recovery |
Auto-Reboot By Watchdog |
Firmware Upgrade |
USB 2.0 Port |
Operating Environment |
5 ~ 40 Degree C |
Dimension (W x D X H) |
188 x 209 x 54 mm |
Power Source |
DC 12V, 3A |
|