ISW-501T

5-Port 10/100Mbps Industrial Fast Ethernet Switch for Wide Temperature Operation

 
 
Slim type with more practicability and convenience
After PLANET ISW / IFT series Fast Ethernet Switch / Converter products being popular, PLANET now releases the advanced industrial hardened Fast Ethernet Switch series with slim type, IP-30 metal case. The compact, IP-30 standard metal case allows either DIN rail or wall mounting for efficient use of cabinet space. The ISW-501T, one of the new series model, equips with 5 10/100Mbps auto negotiation ports and operates reliably in Heavy Industrial demanding environments.

Stable operate performance under difficult environments
The ISW-501T provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb side traffic control cabinets. Being able to operate under the temperature range from -40 to 75 Degree C, the ISW-501T can be placed in almost any difficult environment. The ISW-501T also possesses an integrated power supply source with wide range of voltages (12 to 48V DC) for worldwide high availability applications requiring dual or backup power inputs.

Robust Switch performance
The ISW-501T offers high performance switch architecture. With the 5 10/100Mbps Fast Ethernet ports providing non-blocking switch fabric and wire-speed throughput as high as 1Gbps and the 2K MAC Address table, the ISW-501T can perform wire-speed packets transfer without risk of packet loss. The flow control function enables the ISW-501T to provide fast and reliable data transfer. 

All of the RJ-45 copper interfaces in the ISW-501T support 10/100Mbps Auto-Negotiation for optimal speed detection through RJ-45 Category 3, 4 or 5 cables. The standard Auto-MDI / MDI-X support can detect the type of connection to any Ethernet device without requiring special straight or crossover cables.
 
Ordering Information
ISW-501T 5-Port 10/100Mbps Industrial Fast Ethernet Switch (-40~75 Degree C operating temperature)
Industrial area Switch for data collection and forwarding
The ISW-501T equips with 5 10/100Mbps ports that offer auto MDI / MDIX feature, 1Gbps non-blocking switch fabric and 2K MAC Address table, therefore, it can perform wire-speed packets transfer without risk of packet loss. The ISW-501T, with the slim type IP 30 metal case protection, is ideal for most Heavy Industrial demanding environments.
 
 
Ordering Information
ISW-501T 5-Port 10/100Mbps Industrial Fast Ethernet Switch (-40~75 Degree C operating temperature)
Physical Port
• 5-Port 10/100Mbps RJ-45 with auto MDI / MDI-X function

Layer 2 Features
• Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX Ethernet standard
• Supports Auto-Negotiation and 10/100Mbps half / full duplex mode
• High performance Store and Forward architecture, broadcast storm control, runt / CRC filtering
　eliminates erroneous packets to optimize the network bandwidth
• Prevents packet loss with back pressure (Half-Duplex) and IEEE 802.3x PAUSE frame flow control 
　(Full-Duplex)
• Backplane (Switching Fabric)：1Gbps
• Integrated address look-up engine, supports 2K absolute MAC addresses
• Automatic address learning and address aging
• CSMA / CD Protocol

Industrial Case / Installation
• IP-30 Metal case
• DIN Rail and Wall Mount Design
• 12 to 48V DC, redundant power with polarity reverse protect function and connective removable 
　terminal block for master and slave power
• Supports EFT protection 6000 VDC for power line 
• Supports 6000 VDC Ethernet ESD protection 
• -40 to 75 Degree C operation temperature 
• Free fall, shock, vibration industrial stability
 
Ordering Information
ISW-501T 5-Port 10/100Mbps Industrial Fast Ethernet Switch (-40~75 Degree C operating temperature)
Hardware Specification
10/100Base-TX Ports 5
Dimension (W x D x H) 135 x 87 x 32 mm
Weight 438g
Power Requirement 12~48 VDC, Redundant power with polarity reverse protection function
Power Consumption / Dissipation 3.9 Watts / 13BTU
Installation DIN rail kit and wall mount ear
Alarm rovides one relay output for power fail 
Alarm Relay current carry ability: 3A @ DC 30V
Switch Specification
Switch Processing Scheme Store-and-Forward
Address Table 2K entries
Flow Control Back pressure for half duplex, IEEE 802.3x Pause Frame for full duplex
Switch fabric 1Gbps
Throughput (packet per second) 0.74Mpps
Network cables 10/100Base-TX:
Cat. 3, 4, 5, 5e, 6 UTP cable (100meters, max.)
EIA / TIA-568 100-ohm STP (100meters, max.)
Standards Conformance
Standards Compliance IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3x Full-duplex flow control
Regulation Compliance FCC Part 15 Class A, CE
Stability testing IEC60068-2-32(Free fall),IEC60068-2-27(Shock),IEC60068-2-6(Vibration)
Environmental Specification
Temperature Operating: -40~75 Degree C
Storage: -40~75 Degree C
Humidity Operating: 5~90%
Storage: 5~90% (Non-condensing)

Ordering Information
ISW-501T 5-Port 10/100Mbps Industrial Fast Ethernet Switch (-40~75 Degree C operating temperature)

Datasheet

Date Version Description Download
2010-11-03 1.0 ISW-501T

User's Manual

Date Version Description Download
2009-09-14 1.0 Initial release

EC Declaration

Date Version Description Download
2010-01-28 1.0 Initial release
Ordering Information
ISW-501T 5-Port 10/100Mbps Industrial Fast Ethernet Switch (-40~75 Degree C operating temperature)