IGSW-24040T

Industrial 24-Port 10/100/1000Mbps with 4 Shared SFP Managed Gigabit Switch

 
 
Environmentally Hardened Design for Industrial Networks
The PLANET IGSW-24040T is an environmentally hardened Industrial Managed Ethernet Switch with high Port-density, Gigabit Fiber link capability and 19” rack-mountable design. It is specifically designed to operate stably in electrically harsh and the toughest environment under extended wide operating temperature range. The IGSW-24040T is equipped with advanced management functions and provides 24 10/100/1000Base-T copper ports and 4 shared 1000Base-S/LX SFP slots delivered in a rugged strong case. It is capable of providing non-blocking switch fabric and wire-speed throughput as high as 48Gbps in the temperature range from -40 to 75 Degree C without any packet loss and CRC error. It greatly simplifies the tasks of upgrading the industrial network and building automation LAN for catering to increasing bandwidth demands such as IP video surveillance. The IGSW-24040T is the most reliable choice for highly-managed and Fiber Ethernet application in Industrial network.

　　■ Extended Operating Temperature:From -40 to 75 Degree C
　　■ Robust Industrial Protection:IP30 metal case and 19” rack-mountable design
　　■ Ethernet Protection:6KV DC ESD protection
　　■ Power Redundant:1+2 RPS design, supports one 100~240V AC and dual 36~72V DC power 
　　　　　　　　　　　　　input
　　■ Redundant Ethernet Network:STP, RSTP and MSTP to greatly improve redundant data backup 
　　　　　　　　　　　　　　　　　　　and guarantee network resilience
　　■ Flexible Fiber uplink capability:Compatible with 1000Base-SX/LX and 100Base-FX SFP 
　　　　　　　　　　　　　　　　　　　　transceiver

Layer 2 / Layer 4 Full-functioned Managed Switch for Building Automation Networking 
The IGSW-24040T Industrial Managed Ethernet Switch is perfect for applications in the factory data centers and distributions. It provides advanced Layer 2 to Layer 4 data switching and redundancy, Quality of Service traffic control, network access control and authentication, and Secure Management features to protect customer’s industrial network connectivity with reliable switching recovery capability that is suitable for implementing fault tolerant and mesh network architectures. 

Cost-effective IPv6 Managed Gigabit Switch Solution for Industrial Ethernet
The current IPv4 network infrastructure is not capable enough to provide IP Address to each single user / client. The situation forces the ISP to build up the IPv6 (Internet Protocol version 6) network infrastructure speedily. The iGSW-24040T is the ideal solution to fulfill the demand of IPv6 management Gigabit Ethernet Switch, especially in the Industrial hardened environment. It supports both IPv4 and IPv6 management functions and can work with original network structure. With easy and friendly management interfaces and plenty of management functions included, the IGSW-24040T Managed Switch is the best choice for you to build the IPv6 FTTx edge service and for Industrial applications to connect with IPv6 network.

Dual Redundant Power to Ensure Continuous Operation
The IGSW-24040T particularly supports both AC and DC redundant power to ensure reliable and continuous operation in Industrial Network. Generally, a regular Industrial switch may have two DC powers for redundancy; the IGSW-24040T provides one more power- “Alternating Current” (AC) for stronger redundant application besides providing redundant DC Power.
 
 
The IGSW-24040T is equipped with one 100~240V AC power supply unit and one additional DC 36~72V power supply unit for redundant power supply installation. The Redundant power systems are provided to enhance the reliability with either 100~240V AC power or DC 36~72V power supply unit and specifically designed to fulfill the demands of high tech facilities in handling the highest power integrity. In addition, with the 36~72V DC power supply implemented, the IGSW-24040T can be perfectly applied as the telecom level device which requires constant stable operation at the harsh electronic room.

Powerful Security.
The Industrial Managed Giagbit Switch offers comprehensive Access Control List (ACL) for enforcing security to the edge. Its protection mechanisms also comprise of port-based 802.1x and MAC-based user and device authentication. The port-security is effective in limiting the numbers of clients pass through, so that the network administrators can now construct highly secured corporate networks with time and effort considerably less than before.
 
Ordering Information
IGSW-24040T Industrial 24-Port 10/100/1000Mbps with 4 Shared SFP Managed Gigabit Switch
Extended Operation Temperature and Redundant Dual Power Sources
With Dual Power Input Sources “Alternating Current” (AC) and “Direct Current” (DC)design, the IGSW-24040T prevents the system switch to shut down from a sudden case like power outage. The IGSW-24040T is also equipped with the IP-30 metal case that is ideal for operation temperature range from -40 to 75 Degrees C and it can be placed in any harsh environment such as in the telecom control room.
 
 
Excellent Solution of Core / Department Switch
With 24 10/100/1000Mbps ports, the IGSW-24040T is able to connect up to 24 edge switches in the Ethernet environment. Moreover, the IGSW-24040T provides 48 Gigabit per second switch fabric and high bandwidth for backbone connection. The IGSW-24040T is an excellent choice of core layer switch for a Gigabit network.
 
 
Advanced Protection via Digital Input and Digatal Output Features
The IGSW-24040T’s digital input and digital output functions help the administrator to efficiently react to the emergency events. The digital input can be setup to indicate urgent events and send the messages or alarm to the network system once the urgent event detected by the external device such as door opern detecter or windows open detecter . The digital output function can define the immediate response such as port failed or power failed to the related urgent event.
 
 
Ordering Information
IGSW-24040T Industrial 24-Port 10/100/1000Mbps with 4 Shared SFP Managed Gigabit Switch
Physical Port
　• 24-Port 10/100/1000Base-T Gigabit Ethernet RJ-45
　• 4 100/1000Base-SX/LX SFP slots, shared with Port-21 to Port-24
　• RS-232 DB9 console interface for Switch basic management and setup

Layer 2 Features
　• Prevents packet loss with back pressure (Half-Duplex) and IEEE 802.3x PAUSE frame flow control 
　　(Full-Duplex)
　• High performance of Store-and-Forward architecture, broadcast storm control and runt/CRC filtering 
　　eliminates erroneous packets to optimize the network bandwidth
　• Storm Control support
　　- Broadcast / Multicast / Unknown-Unicast
　• Supports VLAN
　　- IEEE 802.1Q Tagged VLAN
　　- Up to 255 VLAN groups, out of 4094 VLAN IDs
　　- Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad) 
　　- Private VLAN Edge (PVE)
　　- Voice VLAN
　• Supports Spanning Tree Protocol
　　- STP, IEEE 802.1D Spanning Tree Protocol
　　- RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
　　- MSTP, IEEE 802.1s Multiple Spanning Tree Protocol, spanning tree by VLAN
　　- BPDU Guard
　• Supports Link Aggregation
　　- 802.3ad Link Aggregation Control Protocol (LACP)
　　- Cisco ether-channel (Static Trunk)
　　- Maximum 12 trunk groups, up to 16 ports per trunk group 
　　- Up to 16Gbps bandwidth (Duplex Mode)
　• Provides Port Mirror (many-to-1)
　• Port Mirroring to monitor the incoming or outgoing traffic on a particular port 

Quality of Service
　• Ingress Shaper and Egress Rate Limit per port bandwidth control
　• 4 priority queues on all switch ports
　• Traffic classification
　　- IEEE 802.1p CoS
　　- TOS / DSCP / IP Precedence of IPv4/IPv6 packets
　　- IP TCP/UDP port number
　　- Typical network application
　• Strict priority and Weighted Round Robin (WRR) CoS policies
　• Supports QoS and In/Out bandwidth control on each port
　• Traffic-policing policies on the switch port
　• QoS Control List Wizard makes QoS creation and configuration easier and more quickly 
　• DSCP remarking

Multicast
　• Supports IGMP Snooping v1, v2 and v3
　• IGMP Snooping port filtering
　• Querier mode support
　• Multicast VLAN Registration (MVR) support

Security
　• IEEE 802.1x Port-Based / MAC-Based network access authentication
　• Built-in RADIUS client to co-operate with the RADIUS servers
　• TACACS+ login users access authentication
　• RADIUS / TACACS+ users access authentication
　• IP-Based Access Control List (ACL)
　• MAC-Based Access Control List
　• Source MAC / IP address binding
　• DHCP Snooping to filter un-trusted DHCP messages
　• Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
　• IP Source Guard prevents IP spoofing attacks
　• Auto DoS rule to defend DoS attack
　• IP address access management to prevent unauthorized intruder

Management
　• Switch Management Interfaces
　　- Console / Telnet Command Line Interface 
　　- Web switch management
　　- SNMP v1, v2c, and v3 switch management
　　- SSH / SSL secure access
　• Four RMON groups (history, statistics, alarms, and events) 
　• IPv6 IP Address / NTP / DNS management
　• Built-in Trivial File Transfer Protocol (TFTP) client
　• BOOTP and DHCP for IP address assignment
　• Firmware upload / download via HTTP / TFTP
　• DHCP Relay and Option 82
　• User Privilege levels control
　• NTP (Network Time Protocol)
　• Link Layer Discovery Protocol (LLDP) Protocol
　• Cable Diagnostic technology provides the mechanism to detect and report potential cabling issues
　• Reset button for system reboot or reset to factory default
　• PLANET Smart Discovery Utility for deploy management
　• ICMPv6
　• Digital Input / Digital Output
　• Fault Alarm
　• SMTP / Syslog / SNMP Trap remote alarm
　• System Log

Redundant Power System
　• 100~240V AC / 36~ 72V DC Dual power redundant
　• Active-active redundant power failure protection
　• Backup of catastrophic power failure on one supply
　• Fault tolerance and resilience

Digital Input / Digital Output
　• 2 Digital Input (DI)
　• 2 Digital Output (DO)
　• Integrates sensors into auto alarm system
　• Transfers alarm to IP network via email and SNNP trap
 
Ordering Information
IGSW-24040T Industrial 24-Port 10/100/1000Mbps with 4 Shared SFP Managed Gigabit Switch
Hardware Specification
Copper Ports 24 10/ 100/1000Base-T RJ-45 Auto-MDI/MDI-X ports
SFP/mini-GBIC Slots 4 1000Base-SX/LX/BX SFP interfaces, shared with Port 21 to Port 24
Compatible with 100Base-FX SFP
Console Port 1 x RS-232 DB9 serial port (115200, 8, N, 1)
Switch Processing Scheme Store-and-Forward
Switch Fabric 48Gbps / non-blocking
Throughput (packet per second) 35.7Mpps
Address Table 8K entries, automatic source address learning and ageing
Share data Buffer 1392 kilobytes
Flow Control IEEE 802.3x Pause Frame for Full-Duplex
Back pressure for Half-Duplex
Jumbo Frame 10Kbytes
Reset Button < 5 seconds: System reboot
> 10 seconds: Factory Default
Dimension (W x D x H) 440 x 200 x 44.5 mm, 1U high / 19”
Weight 2.96kg
LED Power, Fault, Link/Act and speed per Gigabit port
Power Consumption Max. 30 Watts / 102 BTU (AC)
Power Requirement – AC AC 100~240V, 50/60Hz 0.75A
Power Requirement – DC 36V DC @ 0.75A, Range: 36V ~ 72V DC
ESD Protection 6KV DC
DI/DO 2 Digital Input (DI)
　Level 0: -24~2.1V (± 0.1V)
　Level 1: 2.1~24V (± 0.1V)
　Input Load Current: 10mA max.
2 Digital Output (DO): Open collector to 24VDC, 100mA max. load
Layer 2 Function
Basic Management Interfaces Console, Telnet, Web Browser, SNMPv1, v2c and v3
Secure Management Interface SSH, SSL, SNMP v3
Port configuration Port disable / enable 
Auto-Negotiation 10/100/1000Mbps full and half duplex mode selection 
Flow Control disable / enable 
Bandwidth control on each port
Power saving mode control
Port Status Display each port’s speed duplex mode, link status, Flow control status, Auto negotiation status, trunk status
VLAN 802.1Q Tagged Based VLAN
Port-Based VLAN
Q-in-Q
Private VLAN Edge (PVE)
Up to 256 VLAN groups, out of 4094 VLAN IDs
Port Trunking IEEE 802.3ad LACP / Static Trunk
Supports 12 groups of 16-Port trunk
QoS Traffic classification based, Strict priority and WRR
4-level priority for switching
　- Port Number 
　- 802.1p priority
　- 802.1Q VLAN tag
DSCP/TOS field in IP Packet Policy-Based QoS
IGMP Snooping IGMP (v1/v2) Snooping, up to 255 multicast Groups
IGMP Querier mode support
Access Control List IP-Based ACL / MAC-Based ACL
Up to 256 entries
SNMP MIBs RFC-1213 MIB-II
IF-MIB
RFC-1493 Bridge MIB
RFC-1643 Ethernet MIB
RFC-2863 Interface MIB
RFC-2665 Ether-Like MIB
RFC-2819 RMON MIB (Group 1)
RFC-2737 Entity MIB
RFC-2618 RADIUS Client MIB
RFC-2933 IGMP-STD-MIB
RFC3411 SNMP-Frameworks-MIB 
IEEE802.1X PAE
LLDP
MAU-MIB
Standards Conformance
Regulation Compliance FCC Part 15 Class A, CE
Standards Compliance IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX/100Base-FX
IEEE 802.3z Gigabit SX/LX
IEEE 802.3ab Gigabit 1000T
IEEE 802.3x Flow Control and Back pressure
IEEE 802.3ad Port trunk with LACP
IEEE 802.1D Spanning tree protocol
IEEE 802.1w Rapid spanning tree protocol
IEEE 802.1s Multiple spanning tree protocol
IEEE 802.1p Class of service
IEEE 802.1Q VLAN Tagging
IEEE 802.1x Port Authentication Network Control
IEEE 802.1ab LLDP
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 2068 HTTP
RFC 1112 IGMP version 1
RFC 2236 IGMP version 2
Stability IEC60068-2-32 (Free fall)
IEC60068-2-27 (Shock)
IEC60068-2-6 (Vibration)
Environment
Operating Temperature:-40 ~ 75 Degree C (DC power)
　　　　　　  -20 ~ 60 Degree C (AC power)
Relative Humidity:5 ~ 95% (non-condensing)
Storage Temperature:-40 ~ 85 Degree C
Relative Humidity:5 ~ 95% (non-condensing)

Ordering Information
IGSW-24040T Industrial 24-Port 10/100/1000Mbps with 4 Shared SFP Managed Gigabit Switch

Datasheet

Date Version Description Download
2011-07-14 1.0 IGSW-24040T

Quick Guide

Date Version Description Download
2011-06-15 1.0 Initial Release

User's Manual

Date Version Description Download
2012-08-10 1.1 Fix DI/DO data.
2011-06-15 1.0 Initial Release
Ordering Information
IGSW-24040T Industrial 24-Port 10/100/1000Mbps with 4 Shared SFP Managed Gigabit Switch