IGS-6330-24T4S

Industrial 24-Port 10/100/1000T + 4 1000X SFP Layer 3 Managed Switch (-40~75 degrees C)

 
 
Powerful Layer 3 Routing Switch for Industrial Environment
PLANET IGS-6330-24T4S is an Industrial-grade Layer 3 Rack-mount Managed Ethernet Switch specially designed to build a full Gigabit backbone to transmit reliable but high-speed data in heavy industrial demanding environments and forward data to remote network through fiber optic. It provides 24-Port 10/100/1000BASE-T copper and 4 extra 1000BASE-X SFP fiber optic interfaces delivered in an IP30 rugged strong case with redundant power system, and supports various Layer 3 functions, such as static Layer 3 routing, RIP v1/v2,OSPF v2 and VRRP for router redundancy.
 
 
 
Environmentally Hardened Design for Mission-critical Network
With IP30 metal industrial case protection, the IGS-6330-24T4S provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curbside traffic control cabinets. It also possesses an integrated power supply source with a wide range of voltages (12 to 48V DC) for worldwide high availability applications requiring dual or backup power inputs. Being able to operate under the temperature range from -40 to 75 degrees C as well as with the fan-less cooling system, the IGS-6330-24T4S can be placed in almost any difficult environment.
 
 
Dual Redundant Power to Ensure Continuous Operation
The IGS-6330-24T4S supports DC redundant power supplies to ensure reliable and continuous operation in Industrial Network. The redundant power systems of the IGS-6330-24T4S are provided to enhance the reliability with 12~48V DC power supply unit and specifically designed to fulfill the demands of high-tech facilities in handling the highest power integrity.
 
Layer 3 Wire-speed Routing Performance and VLAN Routing for Secure and Flexible Management
With hardware-based Layer 3 routing capability, the IGS-6330-24T4S provides functionality to facilitate the deployment of applications across networks. It offers VLAN routing feature which allows to cross over different VLANs and different IP addresses for the purpose of having a highly-secured, flexible management and simpler networking application.
 
Fast Recovery to a Redundant Ethernet Network
The IGS-6330-24T4S features strong and self-recovery capability to prevent interruptions and outside intrusions. It incorporates Rapid Spanning Protocol (RSTP), and Multiple Spanning Tree (MSTP) protocols that will shut down specific Ethernet interfaces when system detects a loop. The port Link Aggregation allows the operation of a high-speed trunk combining multiple ports and supports connection fail-over as well. It greatly protects customer’s industrial automation network with switching recovery capability that is used for implementing fault tolerant ring architectures.
 
Efficient Traffic Control
The IGS-6330-24T4S is loaded with robust QoS features and powerful traffic management to enhance services to business-class data, voice, and video solutions. The functionality includes broadcast / multicast storm control, per port bandwidth control and QoS priority. It guarantees the best performance at VoIP and video stream transmission, and empowers the enterprises to take full advantage of the limited network resources.
 
Powerful Security
The Industrial Managed Giagbit Switch offers comprehensive Access Control List (ACL) for enforcing security to the edge. Its protection mechanisms also comprise 802.1x port-based user and device authentication. Port Security allows to limit the number of users on a given port. The network administrators can now construct highly-secured corporate networks with considerably less time and effort than before.
 
User-friendly Secure Management
For efficient management, the IGS-6330-24T4S is equipped with console, web and SNMP management interfaces. With the built-in web-based management interface, the IGS-6330-24T4S offers an easy-to-use, platform independent management and configuration facility. The IGS-6330-24T4S supports SNMP and it can be managed via any management software based on standard of SNMP v1 and v2 protocol. For text-based management, the switch can be accessed via Telnet and the console port. Moreover, the IGS-6330-24T4S offers remote secure management by supporting SSH, SSL and SNMPv3 connection which can encrypt the packet content at each session.
 
Flexible and Extendable Solution
The 4 mini-GBIC slots built in the IGS-6330-24T4S are compatible with the 1000BASE-SX/LX and WDM SFP(Small Form-factor Pluggable) fiber transceivers, meaning the administrator now can flexibly choose the suitable SFP transceiver according to the transmission distance required to extend the network efficiently. It is well suited for applications in the industrial data centers and distributions.
 
Ordering Information
IGS-6330-24T4S Industrial 24-Port 10/100/1000T + 4 1000X SFP Layer 3 Managed Switch (-40~75 degrees C)
Campus / ISP / Telecom VRRP Backbone Routing Switch
The IGS-6330-24T4S incorporates VRRP (Virtual Router Redundancy Protocol), a fault tolerant protocol, to enhance connection reliability with external Ethernet devices. It then allows the service providers to offer certain services such as Internet access on specific VLANs for specific customers and yet still provides other types of services for their other customers on other VLANs.
 
 
Dynamic VLAN Routing Switch
With the built-in robust Layer 3 dynamic routing protocols, the IGS-6330-24T4S ensures reliable routing between VLANs and network segments. The routing protocols can be applied by VLAN interface with up to 512 routing entries. The IGS-6330-24T4S is certainly a cost-effective and ideal solution for enterprises.
 
 
Ordering Information
IGS-6330-24T4S Industrial 24-Port 10/100/1000T + 4 1000X SFP Layer 3 Managed Switch (-40~75 degrees C)
Physical Port
  • 24-Port 10/100/1000Base-T RJ45 copper
  • 4 1000BASE-X mini-GBIC/SFP slots; Port 25 and 26 support 100/1000 dual mode SFP type auto detection
  • One RJ45 console interface for basic management and setup

Industrial Case / Installation
    • IP30 metal case protection
    • Rack mount design
    • Redundant power design
- 12 to 48V DC, redundant power with polarity reverse protect function
    • Supports VLAN
- IEEE 802.1Q -12 to 48V DC, redundant power with polarity reverse protect function
  • Supports EFT protection 2000 VDC for power line
  • Supports 6000 VDC Ethernet ESD protection
  • -40 to 75 degrees C operating temperature

IP Routing Features
  • Static Layer 3 routing
  • IP Routing protocol supports RIP v1/v2, OSPF v2
  • Routing interface provides per-VLAN routing mode
  • VRRP protocol for redundant routing deployment
  • Supports route redistribution

Layer 2 Features
    • High performance of Store-and-Forward architecture and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
    • Storm Control support
- Broadcast / Unknown-Multicast / Unknown-Unicast
    • Supports VLAN
- IEEE 802.1Q tagged VLAN- Up to 255 VLANs groups, out of 4094 VLAN IDs- Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)- Private VLAN- Protocol-based VLAN- Voice VLAN
    • Supports Spanning Tree Protocol
- STP, IEEE 802.1D Spanning Tree Protocol- RSTP, IEEE 802.1w Rapid Spanning Tree Protocol- MSTP, IEEE 802.1s Multiple Spanning Tree Protocol, spanning tree by VLAN
    • Supports Link Aggregation
- Cisco ether-channel (Static Trunk)- Maximum 2 trunk groups, up to 4 ports per trunk group- Up to 8Gbps bandwidth(duplex mode)
  • Port mirroring of the incoming or outgoing traffic on a particular port

Quality of Service
    • Ingress Shaper and Egress Rate Limit per port bandwidth control
    • 8 priority queues on all switch ports
    • Traffic classification
- IEEE 802.1p CoS
  • Strict priority and Weighted Round Robin (WRR) CoS policies
  • Supports QoS and In/Out bandwidth control on each port
  • Traffic-policing policies on the switch port

Multicast
  • Supports IGMP snooping v1, v2 and v3
  • Querier mode support
  • IGMP snooping port filtering
  • MVR (Multicast VLAN Registration)

Security
    • Authentication
- IEEE 802.1x port-based network access authentication- Built-in RADIUS client to co-operate with the RADIUS servers- RADIUS users access authentication
    • Access Control List
- IP-based Access Control List (ACL)- MAC-based Access Control List
Management
    • Switch Management Interfaces
- Console / Telnet Command Line Interface- Web switch management- SNMP v1, v2c, and v3 switch management- SSH / SSL secure access
    • IP address / SNTP / DNS management
    • System Maintenance
- Firmware upload/download via FTP- Reset button for system reboot- Dual Images
  • User Privilege levels control
  • SNTP (Simple Network Time Protocol)
  • Syslog remote alarm
  • SNMP trap for interface Link Up and Link Down notification
  • System Log
  • DHCP Server
 
Ordering Information
IGS-6330-24T4S Industrial 24-Port 10/100/1000T + 4 1000X SFP Layer 3 Managed Switch (-40~75 degrees C)
Hardware Specifications
Copper Ports 24 10/100/1000BASE-T RJ45 Auto-MDI/MDI-X ports
SFP/mini-GBIC Slots 4 1000BASE-SX/LX/BX SFP interfaces 
Compatible with 100BASE-FX SFP for port 25 and 26
Console 1 x RJ45 serial port (115200, 8, N, 1)
Switch Architecture Store-and-Forward
Switch Fabric 56Gbps / non-blocking
Throughput (packet per second) 41.6Mpps
Address Table 8K entries, automatic source address learning and ageing
Shared Data Buffer 8Mbits
Flow Control IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
Jumbo Frame 9Kbytes
Reset Button < 5 sec: System reboot
ESD Protection 6KV DC
EFT Protection 2KV DC
Enclosure IP30 metal case
Installation Rack mount kit
Connector Removable 4-pin terminal block for power input
Pin 1/2 for Power 1; Pin 3/4 for Power 2
Alarm Removable 2-pin terminal block for fault alarm
LED Indicator System:
SYS (Green)
PWR (Green)
Alarm (Red)
Per Port: 
1000 (Orange)
LNK/ACT (Green)
Dimensions (W x D x H) 440 x 253 x 44 mm
Weight 3.1kg
Power Requirements 12 to 48V DC
Power Consumption 11.6 watts / 40BTU (System on)
20.8 watts / 71BTU (Full loading)
Layer 2 Functions
Management Interfaces BasicWeb browser, remote Telnet, SNMPv1, v2c, local console
Secure Management Interface SSH, SSL, SNMP v3
Port Configuration Port disable/enable
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
Flow control disable / enable
Port Status Display each port’s speed duplex mode, link status, flow control status, auto negotiation status, trunk status.
Port Mirroring TX / RX
1 to 1 monitor
VLAN 802.1Q tagged-based VLAN, up to 255 VLAN groups
Q-in-Q tunneling
Private VLAN Edge (PVE)
Protocol-based VLAN
MVR (Multicast VLAN Registration)
Up to 255 VLAN groups, out of 4094 VLAN IDs
Link Aggregation Static trunk
Supports 2 groups of 4-port trunk support
QoS Traffic classification based, strict priority and WRR
8-level priority for switching
- 802.1p priority
- 802.1Q VLAN tag
IGMP Snooping IGMP (v1/v2/v3) snooping, up to 255 multicast Groups
IGMP Querier mode support
Access Control List IP-based ACL / MAC-based ACL
Up to 20 entries
Bandwidth Control Per port bandwidth control
Ingress: 1Kbps~1000Mbps
Storm Control Broadcast, Unicast and Multicast storm control
Supports storm control by per port and by VLAN interface
Rate range: 1~1000000 Kbps
SNMP MIBs RFC-1213 MIB-II
IF-MIB
RFC 1493 Bridge MIB
RFC 1643 Ethernet MIB
RFC 2863 Interface MIB
RFC 2665 Ether-Like MIB
RFC 2737 Entity MIB
RFC 2618 RADIUS Client MIB
RFC 2933 IGMP-STD-MIB
RFC 3411 SNMP-Frameworks-MIB 
IEEE 802.1X PAE
MAU-MIB
Layer 3 Functions
IP Routing Protocol RIP v1/v2, OSPF v2, VRRP
Routing Table 512
Routing Interface Per VLAN
Standards Conformance
Regulation Compliance FCC Part 15 Class A, CE
Stability Testing IEC 60068-2-32 (Free fall)
IEC 60068-2-27 (Shock)
IEC 60068-2-6 (Vibration)
Standards Compliance IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX / 100BASE-FX
IEEE 802.3z Gigabit SX/LX
IEEE 802.3ab Gigabit 1000T
IEEE 802.3x flow control and back pressure
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree Protocol
IEEE 802.1p Class of service
IEEE 802.1Q VLAN tagging
IEEE 802.1x Port Authentication Network Control
RFC 768 UDP
RFC 791 IP
RFC 792 ICMP
RFC 2068 HTTP
RFC 1112 IGMP version 1
RFC 2236 IGMP version 2
RFC 3376 IGMP version 3
RFC 2131/2132 DHCP (Server)
RFC 2328 OSPF v2
RFC 1058 RIP v1
RFC 2453 RIP v2
RFC 3768 VRRP v2
Environment
Operating Temperature: -40 ~ 75 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
Storage Temperature: -40 ~ 85 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
Ordering Information
IGS-6330-24T4S Industrial 24-Port 10/100/1000T + 4 1000X SFP Layer 3 Managed Switch (-40~75 degrees C)

Datasheet

Date Version Description Download
2015-02-06 1.0 IGS-6330-24T4S

Quick Guide

Date Version Description Download
2015-01-13 1.0 Initial release.
Ordering Information
IGS-6330-24T4S Industrial 24-Port 10/100/1000T + 4 1000X SFP Layer 3 Managed Switch (-40~75 degrees C)