IPOE-171S

Industrial Single-Port 10/100/1000Mbps Ultra PoE Splitter

 
Highly Convenient and Robust Industrial PoE Splitter
PLANET IPOE-171S is an Industrial-grade Ultra Power over Ethernet Splitter which delivers both the Ethernet data and a 60-watt to 110-watt PoE power from Ultra PoE PSE (Power Source Equipment) over an UTP cable. It comes with a selectable 12V or 24V DC DIP switch, enabling to deliver a maximum of 95-watt power output to a non-PoE powered Ethernet device. It supports passive 10/100/1000Mbps Ethernet connection and distance up to 100 meters. To fulfill the growing industrial applications, the IPOE-171S is designed to work under the operating temperature range from -40 to 75 degrees C. The IPOE-171S is an ideal solution to transferring power to a traditional network device with high power demand directly without the need to install additional power outlets and electrical cabling in the industrial environment.
 
 
Quick and Easy Ultra Power PoE Network Deployment
Many high-power required traditional Ethernet devices are not designed with PoE PD (Powered Device) capability to accept power over UTP cable. They can only get power through their DC jack while their RJ45 interfaces accept only Ethernet data. The IPOE-171S, functioned as an Ultra PoE PD (Powered Device), splits the combined data and power stream into two separate cords to offer more non-PoE applications, such as: 
　■ POS
　■ AIO (All-in-One) touch PC and thin-client
　■ Digital signage and display tablet
　■ PTZ speed dome
　■ Other network devices that need higher power to work normally
 
 
When functioned with the IPOE-171S, these non-PoE Ethernet devices can immediately become PoE-ready without any modification required on their side. The IPOE-171S frees the device deployment from restrictions due to power outlet locations, which eliminate the costs for additional AC wiring and reduce the installation time.

Innovative, Selectable DC Power Output Voltage
Via the innovative 12/24 volt DIP switch on the front panel, the IPOE-171S can supply either 24V DC power to industrial equipment or 12V DC output to the common network devices. It highly increases the flexibility of the product applications.
 
Dual Power Output Capability
The IPOE-171S shares its 55-watt output power with not only a single power-hungry equipment but also two non-PoE Ethernet devices simultaneously through a 4-pin terminal block. For example, the two power output can be applied as shown below to completely solve the need of electric source:
　■ IP camera (Power 1) + Outdoor housing with fan and heater (Power 2)
　■ IP camera (Power 1) + Pan & Tilt motor (Power 2)
　■ Analog camera (Power 1) + IP video server (Power 2)
 
 
Environmentally Hardened Design
With compact, slim type IP30 industrial case protection, the space-saving Industrial Ultra PoE Splitter IPOE-171S can be placed in almost any difficult environment. It allows either DIN rail or wall mounting for efficient use of cabinet space. Being able to operate under the temperature range from -40 to 75 degrees C, the IPOE-171S is the ideal product for co-working with Industrial High Power Injector which can feed the power to non-PoE devices up to 100 meters (328 feet) away in those harsh environments.
 
 
Ordering Information
IPOE-171S Industrial 1-port Gigabit Ultra PoE Splitter
Ultra PoE Switch and Splitter Installation
For a place which is hard to find the power inlet, the IPOE-171S separates digital data and power into three optional outputs (12V/24V DC) to non-PoE devices such as laptops, PTZ (Pan, Tilt & Zoom) network cameras, PTZ speed dome cameras, color touch-screen IP phones, multi-channel wireless LAN access points and other network devices at distance up to 100 meters.
 
 
Ordering Information
IPOE-171S Industrial 1-port Gigabit Ultra PoE Splitter
Interface
    • 2 RJ45 interfaces
- 1-port Data + Power input- 1-port Data output
  • 2 DC output (4-pin terminal block)
  • 1 DC 12V/24V DIP switch

Power over Ethernet
  • Complies with ultra Power over Ethernet end-span and mid-span PD
  • Complies with IEEE 802.3at Power over Ethernet Plus end-span/mid-span PD
  • Supports PoE input power up to 110 watts
  • Splits the 50~56V DC power over RJ45 Ethernet cable into DC 12V/24V output
  • Remote power feeding up to 100 meters

Hardware
  • IP30 metal case protection
  • DIN rail and wall mount design
  • -40 to 75 degrees C operating temperature
 
Ordering Information
IPOE-171S Industrial 1-port Gigabit Ultra PoE Splitter
Hardware Specifications
Interface ■ PoE Input Port:
　1 x 10/100/1000 BASE-T RJ45
　“PoE (Data + Power) In”
■ Data Output Port:
　1 x 10/100/1000 BASE-T RJ45
　“Data Out”
■ DC Out Plug Connector:
　1 removable 4-pin terminal block
■ DIP-Switch:
　12V DC /24V DC output voltage
LED Indicator ■ Power Ready: Green
■ 802.3at PoE+ In: Green
■ Ultra PoE or 802.3bt PoE in: Green
■ DC 12V: Orange
■ DC 24V: Green
Network Cable ■ Ultra PoE (60W/75W/95W): 4-pair UTP Cat5e, 6, up to 100m (328ft)
■ 802.3at PoE+: 2-pair UTP Cat. 3, 4, 5, up to 100m (328ft)
Data Rate 10/100/1000Mbps
Dimensions (W x D x H) 32 x 87 x 132 mm
Weight 425g
Installation DIN rail/wall mountable
Enclosure IP30 metal case
Power Requirements 50 ~ 56V DC PoE
Power Output (at 56V DC Input) ■ 110-watt PoE input:
　12V DC, 8A (max.)
　24V DC, 4A (max.)
■ 75-watt PoE input:
　12V DC, 4.5A (max.)
　24V DC, 2.3A (max.)
Power Consumption ■ System on with PoE input:
　3.7 watts
■ Ethernet full loading without DC output:
　3.7 watts
■ Full loading with maximum 12V DC, 4A output:
　60.2 watts
■ Full loading with maximum 12V DC, 8A output:
　110 watts (110-watt PoE in)
Power over Ethernet
PoE Standard 802.3bt Type 3/Type 4 Power over Ethernet, 
4-pair 802.3at PoE+ and Cisco UPOE compliant with voltage within 50V-56V DC
Power Output DC 12V/24V by DIP switch control
PoE Power Supply Type end-span + mid-span
end-span
mid-span
Power Pin Assignment 1/2 (+), 3/6 (-); 4/5 (+), 7/8 (-) or 1/2(-), 3/6(+); 4/5(+), 7/8(-)
Standards Conformance
Standards Compliance IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T Gigabit Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3af Power over Ethernet
Regulatory Compliance FCC Part 15 Class A, CE
Environment
Operating Temperature -40~ 75 degrees C
Storage Temperature -40~ 85 degrees C
Humidity 5 ~ 95% (non-condensing)
Ordering Information
IPOE-171S Industrial 1-port Gigabit Ultra PoE Splitter

Datasheet

Date Version Description Download
2017-02-18 1.0 IPOE-171S

User's Manual

Date Version Description Download
2017-02-15 1.0 Initial release.
Ordering Information
IPOE-171S Industrial 1-port Gigabit Ultra PoE Splitter