WNAP-W2201A

300Mbps 802.11n In-Wall Wireless Access Point (EU Type)

Overview

All-in-One Manageable Wi-Fi Solution for Hospitality Industry
PLANET WNAP-W2201A enables hospitality industry to build a high-speed wireless network with a maximum data rate of 11n 300Mbps via PLANET AP controller. Furthermore, it conforms to standard 86-type electrical junction box and IEEE 802.3af/at PoE, suitable for in-wall installation. The WNAP-W2201A has also a built-inRJ11 port for phone pass-through and 100BASE-TX RJ45 port for Ethernet connection to such device as IPTV or laptop, enabling to integrate a hotel network with its all-in-one interface. This definitely helps guests gain good user experience.
Ease of Deployment with PLANET AP Controller
To expand the capability of in-wall AP, PLANET WNAP-W2201A comes with centralized management, enabling the hospitality industry to deploy multiple APs with a single interface of AP controller and reducing repetitive tasks including AP provisioning, AP status monitoring and AP maintenance. In addition, by connecting with PLANET WAPC AP controller series, the WNAP-W2201A comes with PoE alive check and PoE schedule features, which help hoteliers optimize their wireless network within minutes.
Suitable for Any Room Installation without Breaking Interior Design
Featuring attractive in-wall design, the WNAP-W2201A can be firmly installed into the wall via the standard 86 x 86 mm or 75 x 75 mm European outlet box, which makes electrical wiring invisible and convenient for room installation without affecting the original interior design. It is ideal for hotels, residences, hospitals and more to establish wireless network.
Comprehensive Wireless Operation Mode
The WNAP-W2201A supports multiple wireless communication connectivities such as AP (Multi-SSIDs), Client,Repeater/Universal Repeater, WDS Point-to-Point (PtP) and WDS Point-to-Multipoint (PtMP), allowing users to comprehensively experience various applications.
Easy to Install and Manage
Integrated with RJ11 phone pass-through, RJ45 Ethernet connection and IEEE 802.3af/at PoE PD scheme, the WNAP-W2201A is easy to be installed to any room’s existing 86-type or 75-type junction box with only 6 steps. The setup wizard and on-line help can simplify the configuration even for a user who has never experienced in setting up a wireless network. In aspect of centralized management, besides the SNMP, multiple devices can be configured and monitored by PLANET AP controller. The WNAP-W2201A helps the system administrator overcome the difficulties of wireless deployment.
Ordering Information
WNAP-W2201A 300Mbps 802.11n Wireless In-wall PoE Access Point

Application

In-wall Design Ideal for High-density Wireless Network
The WNAP-W2201A is specifically designed for hotels, offering guests with convenient Wireless LAN service. With the standard 86/75 type electrical outlet box installed and PLANET AP controller supported, you don’t need to spend extra time and cost to deploy the wireless network. Its compact and all-in-one interface adapted to the room can match any decor and makes wiring invisible. The WNAP-W2201A, with centralized management characteristic and comprehensive operation modes fulfilling any application at hotels and residences, brings the most convenience to system administrators or machine operators. No expensive instruments or complex back-end subscriber managed systems are required for deployment.
Ordering Information
WNAP-W2201A 300Mbps 802.11n Wireless In-wall PoE Access Point

Key Features

Standard Compliant Hardware Interface
  • Compliant with IEEE 802.11n wireless technology with data rate of up to 300Mbps
  • One 10/100BASE-TX port and one PoE powered device (PD) port
  • One RJ11 port for phone line connection
  • European 86-type and 75-type wall outlet compatibility

Secure Network Connection
  • Advanced security: 64-/128-bit WEP, WPA/WPA2 and WPA-PSK/WPA2-PSK (TKIP/AES encryption), 802.1x
  • Supports wireless MAC address filtering control to limit the connected wireless clients

Comprehensive Wireless Advanced Features
  • Multiple operation modes including AP (Multi-SSIDs), Client, Repeater/Universal Repeater, WDS Point-to-Point (PtP) and WDS Point-to-Multipoint (PtMP)
  • Up to 5 multiple-SSIDs to allow users to access different networks through a single AP
  • Supports WMM (Wi-Fi Multimedia) and wireless QoS to enhance the efficiency of multimedia application
  • Supports IAPP (Inter Access Point Protocol) wireless roaming to enable clients to roam across multiple APs
  • Provides 5-level Transmit Power Control to adapt various environments
  • Wireless schedule allows administrators to enforce time-based internet access
  • Self-healing (Schedule Reboot) mechanism for reliable connection

Easy Deployment & Centralized Management
  • Supports AP controller to enable administrator to configure and monitor multiple APs simultaneously
  • Flexible deployment with standard 802.3af/at PoE/PD supported
  • Stylish in-wall design perfectly matches the room decoration
  • Step-by-step configuration with intelligent setup wizard and graphical Web-based UI
  • Supports SNMP-based management interface
  • System status monitoring including associated client list and system log
Ordering Information
WNAP-W2201A 300Mbps 802.11n Wireless In-wall PoE Access Point

Specification

Hardware Specifications
Interface PoE Port: 1 x 10/100Mbps auto MDI/MDI-X RJ45 port (rear panel)
※ IEEE 802.3af PoE PD Port
LAN Port: 1 x 10/100Mbps auto MDI/MDI-X RJ45 port
RJ11 Port: Connect to the telephone through the 4-conductor phone line
PoE 802.3af PoE PD, Class 3
Antenna Built-in 3dBi antenna x 2
Reset Button Reset button at side panel
(Press over 5 seconds to reset the device to factory default)
LED Indicators PWR/SYS LED
Material Plastic
Dimensions (W x D x H) 86 x 35 x 86 mm
Weight 76g
Power Requirements 802.3af/at PoE, 48-56V DC input, 0.35A (max.)
Power Consumption < 10W
Wireless interface Specifications
Standard Compliance with IEEE 802.11b/g/n
Frequency Band Europe -- ETSI: 2.412~2.472GHz
Operating Channel Europe -- ETSI: 1~13
Channel Width 20 or 20/40MHz
Data Transmission Rates ■ 802.11n (HT40):
　270/243/216/162/108/81/54/27Mbps
　135/121.5/108/81/54/40.5/27/13.5Mbps (dynamic)
■ 802.11n (HT20):
　130/117/104/78/52/39/26/13Mbps
　65/58.5/52/39/26/19.5/13/6.5Mbps (dynamic)
■ 802.11g: 54/48/36/24/18/12/9/6Mbps (dynamic)
■ 802.11b: 11/5.5/2/1Mbps (dynamic)
Transmission Distance 802.11n: up to 70m
802.11g: up to 30m
The estimated transmission distance is based on the theory.
The actual distance will vary in different environments.
Max. RF Power 802.11n: 17 ± 2dBm
802.11g: 17 ± 2dBm
802.11b: 18 ± 2dBm
Receiver Sensitivity IEEE 802.11b: -92dBm @ 1Mbps; -85dBm @ 11Mbps, PER < 8%
IEEE 802.11g: -88dBm @ 6Mbps; -73dBm @ 54Mbps, PER <10%
IEEE 802.11n: -90dBm @ MCS8; -70dBm @ MCS15, PER <10%
Data Rate IEEE 802.11b: 1/2/5.5/11Mbps
IEEE 802.11g: 6/9/12/18/24/36/48/54Mbps
IEEE 802.11n: 300 Mbps in 40MHz mode/150Mbps in 20MHz mode
TX Power Provides 5-level Tx Power Control (100%, 70%, 50%, 35%, 15%)
Wireless Management Features
Operation Mode ■ Standalone AP
■ Managed AP
Wireless Mode ■ AP (Multiple-SSIDs)
■ Client
■ Repeater (WDS+AP)
■ Universal Repeater (AP+Client)
■ WDS PtP Bridge
■ WDS PtMP Bridge
Encryption Security ■ WEP (64-/128-bit) encryption security
■ WPA/WPA2 (TKIP/AES)
■ WPA-PSK/WPA2-PSK (TKIP/AES)
■ 802.1x RADIUS Authentication
Wireless Security Wireless MAC address filtering (up to 20 entries)
Supports WPS (Wi-Fi Protected Setup)
SSID broadcast and hide
Wireless Advanced ■ Supports WMM (Wi-Fi Multimedia) for better data transmission of video or
　on-line demand
■ Supports wireless schedule
■ Multiple SSIDs: up to 5
■ Wireless Isolation: Enables it to isolate each connected wireless client of
　a BSSID from communicating with each other
■ IAPP (Inter Access Point Protocol): 802.11f wireless roaming
■ Provides wireless statistics, max. associated station number
Max. Supported Clients Wired: 253
2.4GHz Wireless: 32
LAN Built-in DHCP server supporting static IP address distribution
Supports static IP and dynamic IP
Supports UPnP
Supports 802.1d Spanning Tree
System Management Web-based (HTTP) management interface
Supports SNTP synchronization
Easy firmware upgrade via HTTP/TFTP (through AP controller)
Easily locate deployed APs through the LED control
Supports SNMP management, LED On/Off control, Schedule Reboot
Supports Smart Discovery Utility, System Log
Supports WAPC series of AP controllers for central management
Max. WDS Peers 8
IEEE Standards IEEE 802.11n (2T2R, up to 300Mbps)
IEEE 802.11g
IEEE 802.11b
IEEE 802.11i
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3x flow control
Other Protocols and Standards CSMA/CA, CSMA/CD, TCP/IP, DHCP, ICMP, SNTP
Environment & Certification
Temperature Operating: -10 ~ 50 degrees C
Storage: -40 ~ 70 degrees C
Humidity Operating: 10 ~ 90% (non-condensing)
Storage: 5 ~ 90% (non-condensing)
Regulatory CE, RoHS
Ordering Information
WNAP-W2201A 300Mbps 802.11n Wireless In-wall PoE Access Point

Download

Datasheet

Date Version Description Download
2016-02-25 1.0 WNAP-W2201A

Quick Guide

Date Version Description Download
2016-02-05 1.0 Initial release.

User's Manual

Date Version Description Download
2016-03-04 1.0 Initial release.
Ordering Information
WNAP-W2201A 300Mbps 802.11n Wireless In-wall PoE Access Point

Related Products

Photo Model Description
POE-152 IEEE 802.3af Power Over Ethernet Injector (End-Span)
POE-2400G 24-Port Gigabit IEEE 802.3at PoE+ Managed Injector Hub (440 watts)
WAPC-1232HP Wireless AP Controller with 8-Port 802.3at PoE+
WAPC-2864HP Wireless AP Controller with 24-Port 802.3at PoE + 4-Port 10G SFP+
WDAP-C7200AC 1200Mbps 802.11ac Dual Band Ceiling-mount Wireless Access Point
WDAP-W7200AC 1200Mbps 802.11ac Dual Band Wall-mount Wireless Access Point
WDL-U601AC 433Mbps 802.11AC Dual Band Wireless USB Adapter
WGSD-10020HP L2+ 8-Port 10/100/1000T + 2-Port 100/1000X SFP Managed 802.3at PoE Switch
WGSW-24040HP / WGSW-24040HP4 24-Port 10/100/1000Mbps 802.3at PoE+ Managed Switch with 4 Shared SFP Ports
Ordering Information
WNAP-W2201A 300Mbps 802.11n Wireless In-wall PoE Access Point