Hardware Specifications |
Copper Port |
10 10/100/1000BASE-T MDI/MDIX Ports |
PoE Injector Port |
8-port with 802.3at/af PoE injector function with Port-1 to Port-8 |
Switch Architecture |
Store-and-Forward |
Switch Fabric |
20Gbps/non-blocking |
Switch Throughput@64 bytes |
14.88Mpps@64 bytes |
MAC Address Table |
8K entries, automatic source address learning and aging |
Maximum Frame Size |
9K bytes |
Flow Control |
IEEE 802.3x pause frame for full-duplex Back pressure for half-duplex |
LED |
System:
10/100/1000BASE-T RJ45 interfaces:
- 10/100Mbps LNK/ACT (Red)
- 1000Mbps LNK/ACT (Green)
PoE interfaces:
|
DIP Switch |
Selectable operation mode
|
Dimensions (W x D x H) |
220 x 150 x 43 mm (1U height) |
Enclosure |
Metal |
Weight |
1260 g |
Power Requirements |
AC 100~240V, 50/60Hz, 2.5A max. |
Power Consumption/ Dissipation |
System On: Max. 5.6 watts/19.1 BTU Ethernet Full Loading: Max 10.6 watts/36.1 BTU PoE Full Loading: Max. 139 watts/474.2 BTU |
ESD Protection |
Contact discharge of 4KV DC Air discharge of 6KV DC |
Thermal Fan |
1 |
Power over Ethernet |
PoE Standard |
IEEE 802.3af Power over Ethernet/PSE IEEE 802.3at Power over Ethernet Plus/PSE |
PoE Power Supply Type |
End-span |
PoE Power Output |
Per port 55V DC, 540mA. max. 30 watts |
Power Pin Assignment |
1/2(+), 3/6(-) |
PoE Power Budget |
120 watts |
Max. Number of Class 2 PDs |
8 |
Max. Number of Class 3 PDs |
8 |
Max. Number of Class 4 PDs |
4 |
Standards Conformance |
Regulatory Compliance |
FCC Part 15 Class A, CE |
Standards Compliance |
IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab Gigabit 1000BASE-T IEEE 802.3x Flow control and back pressure IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus IEEE 802.3az Energy Efficient Ethernet (EEE) |
Environment |
Operating |
Temperature: 0 ~ 50 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |
Storage |
Temperature: -10 ~ 70 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |