VC-203PR

PoE over Coaxial Extender – Receiver

PLANET VC-203Px PoE over Coaxial Extender series is designed to extend IP Ethernet transmission and inject power over an existing coaxial cable for distance up to 1000m (3280ft) to PoE IP camera, PoE wireless AP and any 802.3af/at complied powered device (PD).

The VC-203Px consists of a Transmitter and Receiver set which can work in pair without any power adapter anywhere on your network infrastructure. The solution contains two brand-new products:
 ■ VC-203PT: 1-Port 10/100TX PoE PD + 1-Port BNC PoE over Coaxial PSE Extender – Transmitter
 ■ VC-203PR: 1-Port 10/100TX PoE PSE + 1-Port BNC PoE over Coaxial PD Extender – Receiver
Models
VC-203PT
VC-203PR
Power over Coax. Extender
Transmitter
Receiver
Power Input
(Optional)
PoE
RJ-45: 802.3af/at PoE In
UTP cable, up to 100m
BNC: PoE over Coaxial In
Coaxial cable, up to 1km
DC
DC Jack: 52~56V DC In
DC Jack: 52~56V DC In
Power Output
PoE
BNC: Power over Coaxial Out
Coaxial cable, up to 1km
RJ-45: 802.3af/at PoE out
UTP cable, up to 100m
DC
--
2-pin Terminal Block :
Selectable 12V/24V DC

It is a perfect solution for sending IP Video links and power to remote PoE IP camera installation that is beyond the 100 meters distance limit of Ethernet.
Power over Coaxial
Based on IEEE 802.3at High Power over Ethernet and up to 25 watts of power output, PLANET PoE over coaxial extender solution eliminates the need for additional remote site power while allowing a single PoE source, such as a PoE network switch, to provide power to both transceivers and the camera at long range. This feature eliminates the need for local and remote site power supplies.

IEEE 802.3at/af PoE Injector and Splitter in one box design
The VC-203PR is a Single-Port, 802.3at High Power over Ethernet Injector providing maximum up to 30 watts of power output over Ethernet cable which allows data and power to transmit simultaneously through the cable to PoE PD (Powered Device). In addition, the VC-203PR also features PoE splitter function with selectable 12V/24V DC power output which makes non-PoE equipment power up as well.
Stable Operating Performance under Difficult Environments
The VC-203PT and VC-203PR extender is the perfect solution for extended distance data and power transmission for warehouses, parking lots, campuses, casinos, and many more. They can operate stably under temperature range from -40 to 75 degrees C which enables the users to conveniently apply the device in almost any location of the network.
Ordering Information
VC-203PR 1-Port 10/100TX PoE PSE + 1-Port BNC PoE over Coaxial PD Extender – Receiver
Applications of VC-203PT and VC-203PR
The VC-203PT, which functions with the VC-203PR, can split into several kinds of combinations. The VC-203PT can power by either from external DC power adapter or high power PoE switch. The power output of the VC-203PR is selectable - PoE output to the PoE Power Devices (PD) OR DC power output to the non-PoE devices.
Type 1 – VC-203PT with 52~56V power adapter and VC-203PR with PoE power output
CPE
CO
VC-203PT
VC-203PR
Power Input
Power adapter with 52~56V DC in
BNC with DC power over coaxial input
Power Output
BNC with DC power over coaxial output
RJ-45 with 802.3at/af PoE output
Type 2 – VC-203PT with 52~56V power adapter and VC-203PR with DC power output
CPE
CO
VC-203PT
VC-203PR
Power Input
Power adapter with 52~56V DC in
BNC with DC power over coaxial input
Power Output
BNC with DC power over coaxial output
DC Terminal block with 12V or 24V DC output
Type 3 – VC-203PT with PoE power input and VC-203PR with PoE power output
CPE
CO
VC-203PT
VC-203PR
Power Input
RJ-45 with 802.3at/af PoE input
BNC with DC power over coaxial input
Power Output
BNC with DC power over coaxial output
RJ-45 with 802.3at/af PoE output
Type 4 – VC-203PT with PoE power input and VC-203PR with DC power output
CPE
CO
VC-203PT
VC-203PR
Power Input
RJ-45 with 802.3at/af PoE input
BNC with DC power over coaxial input
Power Output
BNC with DC power over coaxial output
DC Terminal block with 12V or 24V DC output
Type 5 – PLANET VC-202A (does not support Power over coaxial) with coaxial link to the VC-203PR, and VC-203PR gets external DC power input directly and RJ-45 with PoE output
CPE
CO
VC-203PT
VC-203PR
Power Input
Power adapter with 5V DC in
Power adapter with 52~56V DC in
Power Output
Does not support power output
DC Terminal block with 12V or 24V DC output
Ordering Information
VC-203PR 1-Port 10/100TX PoE PSE + 1-Port BNC PoE over Coaxial PD Extender – Receiver
Physical Port
  • 1 x 10/100Base-TX RJ-45 copper interface (802.3at/af PoE Out)
  • 1 x BNC connector (Power and data receiver)
  • 1 x 2 Pin Terminal Block for 12/24V DC output
Power over Ethernet
  • Supports Power over Ethernet PD, PoE Injector and PoE Splitter
  • Eliminates power cabling with PoE over Coaxial
  • Ethernet over coaxial up to 1km with 5C2V/RG6 75Ωcable
  • Complies with IEEE 802.3af / IEEE 802.3at Power over Ethernet on RJ-45 port
  • Supports PoE Power up to 30.8 watts (Vary on Power Source and Coaxial Distance)
  • Auto detects remote powered device (PD)
  • Supports adjustable two different output voltage options (12V / 24V) to fit various non-PoE devices
Layer 2 Features
  • Supports auto-negotiation and 10/100Mbps half / full duplex
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
VDSL2 Features
  • One box design, Master / Slave selectable via DIP Switch
  • Defines Asymmetric (Band Plan 998) and Symmetric band plans for the transmission of Upstream and Downstream signals
Industrial Case / Installation
  • Supports extensive LED indicators for network diagnostics
  • IP30 metal case protection
  • Compact size, DIN rail and wall mount design
  • Power Input: External DC or PoC (Power over Coaxial) power input
  • Supports EFT 2000V DC protection for power line
  • Supports ESD 2000V DC Ethernet protection
  • -40 to 75 degrees C operating temperature
Ordering Information
VC-203PR 1-Port 10/100TX PoE PSE + 1-Port BNC PoE over Coaxial PD Extender – Receiver
Hardware Specifications
Interface Copper
 10/100Base-TX RJ-45
 Auto-negotiation/ Auto-MDI/MDI-X
 802.3at/af PoE Output
Coaxial
 BNC, female
 Power over Coaxial Input
DC Socket(Optional)
 52~56V DC input
DIP-Switch
 2-Position DIP Switch(Front)
  ■ Selectable CO or CPE mode
   (Default: CO)
  ■ Selectable Band plan: Asymmetric or Symmetric
   (Default: Asymmetric)
 2-Position DIP Switch (Rear)
  ■ PoE out or DC out
   (Default: PoE out)
  ■ 12V DC / 24V DC output voltage
   (Default: 12V DC)
LED Indicators
LED is Green in Color:
System PoE:
■ PWR ■ PoE IN
VDSL2: ■ PoE Out
■ LNK Ethernet:
■ CO ■ LNK/ACT
■ CPE ■ 100
ESD Protection 2KV DC
EFT Protection 2KV DC
Enclosure IP30 metal case
Installation Wall mount or DIN rail with optional kit
Dimensions (W x D x H) 94 x 70.3x 39.2 mm
Weight 302g
Power Requirements  ■ BNC Power over Coaxial Input: 44~57V DC
 ■ DC Input: 52~56V DC
Power over Ethernet/Coaxial
PoE Standard IEEE 802.3at Type 2
IEEE 802.3af
PSE Interface RJ-45
48~56V DC, 600mA max.
End-Span, Pin 1/2(+), 3/6(-)
PD Interface BNC
Input Range: 44~57V DC
DC Power Output 12V DC, 2A max.
24V DC, 1A max.
Max. PoE Budget Power Input by PoC
 ■ RJ-45 : 20 watts
Power Input by DC
 ■ RJ-45 : 30 watts
Performance* (Downstream / Upstream)**
Distance
Data Rate
VC-203PR PoE Output
Asymmetric Mode
Symmetric Mode
VC-203PT
W/DC IN
VC-203PT
W/PoE+ IN
200m
100/60 Mbps
90/100 Mbps
20W
13W
400m
95/55 Mbps
85/100 Mbps
16W
11W
600m
90/50 Mbps
70/80 Mbps
12W
10W
800m
85/45 Mbps
65/70 Mbps
7W
6W
1000m
70/35 Mbps
55/55 Mbps
5W
4W
1200m
60/25 Mbps
45/40 Mbps
-
-
Standards Conformance
Standards Compliance IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3af Power over Ethernet (802.3at Type 1)
IEEE 802.3at Power over Ethernet (802.3at Type 2)
Regulation Compliance FCC Part 15 Class A, CE
Environment
Temperature
Operating: -40 ~ 75 degree C
Storage: -40 ~ 75 degrees C
Humidity Operating
Operating: 5 ~ 95% (Non-condensing)
Storage: 5 ~ 95% (Non-condensing)
*The actual data rate and power output will vary on the quality of the copper wire and environment factors.
**Default Downstream VC-203PR to VC-203PT ; Upstream VC-203PT to VC-203PR.
Ordering Information
VC-203PR 1-Port 10/100TX PoE PSE + 1-Port BNC PoE over Coaxial PD Extender – Receiver

Datasheet

Date Version Description Download
2013-08-28 1.0 VC-203PR

User's Manual

Date Version Description Download
2013-07-08 1.0 Initial release.

EC Declaration

Date Version Description Download
2013-08-27 1.0 Initial release.
Ordering Information
VC-203PR 1-Port 10/100TX PoE PSE + 1-Port BNC PoE over Coaxial PD Extender – Receiver