IHD-200PT

HDMI / Video Wall over PoE IP Transmitter

Make Advertising Effective and Easy
PLANET IHD-200PT / IHD-200PR HDMI / Video Wall over IP with PoE delivers a great HD video distribution solution such as bringing an efficient and effective advertising deployment. The IHD-200 PoE series is the combination of the transmitter, IHD-200PT, and the receiver, IHD-200PR. They allow you to simultaneously send out a HDMI signal to one or more HDMI displays over a single cat. 5/5e cable (or above) Ethernet infrastructure. Besides, by supporting PoE function, meaning there is no additional power supply needed, the IHD-200 PoE series thus reduces the complexity of cable installation.
The IHD-200 PoE series can distribute HD digital content from multiple sources to practically any number of remote displays on a LAN and deliver ultra high quality 1080P HDMI video broadcast over IP network. It not only offers smooth vivid 1080P full motion video with audio quality as CD, but also ensures the sharp images and text giving the viewers the maximum visual effect and ease of reading. By cascading multiple Ethernet switches as the backbone of the IHD-200 PoE series, it allows displays to be distributed far away from the source devices while sustaining consistent 1080P video and audio quality. The video sources can be rack centralized, decentralized or even a mixture of both. It thus increases the flexibility, scope and scalability of audio and video distribution via the Ethernet networks.
High-Speed Video Distribution via Gigabit LAN
The IHD-200 PoE series is a perfect solution for audio and video signal extension via the existing LAN. Designed with Gigabit LAN interface, it supports super high speed transmission, which makes it ideal for live presentations, public broadcasting, education training, boardrooms, etc.
Exclusive Video Transmission by IGMP Multicast Technology
One IHD-200PT in local site can drive multiple IHD-200PR in remote sites without consuming extra network loading. Integrating with Gigabit switch built-in with IGMP multicast functions, there are 16 channels selectable via the IHD-200 PoE series and up to 4 channels can be transmitted simultaneously. IGMP is an integral part of IP multicast and a communications protocol used by hosts and adjacent routers on IP networks to establish multicast group memberships. IGMP can be used for one-to-many networking applications such as online streaming video and gaming, and allows exclusive transmission and more efficient use of resources.
Extended Display Identification Data (EDID) Support
The IHD-200 PoE series adopts EDID (Extended Display Identification Data) COPY function to make smooth video distribution over different types of display units. EDID is greatly important as it contains information about resources’ manufacturer names, serial numbers, product types, maximum image sizes, color characteristics, factory pre-set timings, frequency range limits, etc. In some cases, display problems may occur due to incorrect EDID communication between the display monitor and the transmitting unit or inappropriate EDID data programmed by display manufactures. Therefore, with EDID COPY function, the IHD-200 PoE series allows the system to copy EDID information from EDID compliant displays and assures accurate display performance.
Easy Video Channel Matching through Network Configuration
The IHD-200 PoE series network can be configured by a central computer over the same LAN within a certain distance. Fully leveraging the mature Gigabit Ethernet with 802.1Q VLAN function, multi-casting can be performed to allow more video source/senders in the network and be remotely managed. Just adjust and match video channel setting by the simple DIP switch in both the IHD-200PT and IHD-200PR. The video distribution is easily deployed through Plug and Play.
High Quality Output and Performance
The IHD-200 PoE series supports Full HD 1080P, HDCP and Blu-ray quality, which have been commonly used for applications that require real-time high video resolution and transmission in long distance. It also contains security and noise immunity as well as HDMI with 2ch. audio (dts.) functions to offer the superior video distribution.
Ordering Information
IHD-200PR HDMI / Video Wall over IP Receiver with PoE
IHD-200PT HDMI / Video Wall over IP Transmitter with PoE
PLANET IHD-200PT and IHD-200PR work as a pair to facilitate the management of video wall and HDMI display over IP Ethernet with PoE.
Video Extender
The IHD-200PT and IHD-200PR are able to send the same video signal to multi-monitors in different locations at the same time. It helps to quickly extend the image and commercial to the public efficiently in such places as expos, food courts, boardrooms, and any public areas.
Video Wall
To bring the image and picture in larger size over video wall, the IHD-200PT and IHD-200PR are the ideal solution to distributing one specified image, picture, or video to multiple screens which are usually applicable for sports, department stores, movie theaters, etc.
Efficient Control via Selectable 16-Channel DIP Switch
Where there is more than one transmitter in the video wall system, the rotary DIP switch in the IHD-200PT and IHD-200PR facilitates distinguishing the pair of the transmitter and receiver units in the same channel. It further enables the broadcasting system to perform multi functions including Video Extender and Video Wall simultaneously through matching of the IHD-200PT and IHD-200PR.
Combining the two functions
The selectable 16-channel DIP switch is applied to combine the two main functions as shown in the following diagram:
Ordering Information
IHD-200PR HDMI / Video Wall over IP Receiver with PoE
IHD-200PT HDMI / Video Wall over IP Transmitter with PoE
HDMI Network
  • 1080P ultra high quality video transmitter
  • Assigns video sources to any monitor of the video wall
  • Up to 8 x 8 Screen Array supported
  • Extends high definition video signal over Gigabit LAN and IGMP
  • The selectable 16-channel DIP switch is easily applied for multi-casting group matching
  • 1-to-1, 1-to-many and multi-casting broadcasting architectures allow to add more displays without adding LAN bandwidth loading

Video Output Characteristics
  • HDCP compliant and Blu-ray ready
  • Supports HDMI with 2ch. audio (dts.)
  • HDTV compatible, supporting 1080P, 1080i, 720P, 720i
  • Compatible with common screen resolutions from XGA, SXGA, UXGA, WSXGA to the latest Full HD system

Easy Installation & Management
  • PoE function supported; no additional power supply needed
  • Automatic EDID (Extended Display Identification Data) configuration
  • Friendly Web UI and simple utility for ease of use
  • Supports multi-casting group with Gigabit Ethernet Managed Switch (802.1q VLAN & IGMP function required)
  • VESA mounting bracket supported
Ordering Information
IHD-200PR HDMI / Video Wall over IP Receiver with PoE
IHD-200PT HDMI / Video Wall over IP Transmitter with PoE
Hardware Specifications
Network Interface RJ-45 port (10/100/1000Base-T Ethernet) x 1
Console Control port x 1
AUX / EXT. port x 1
Cabling Cat. 5/5e/6 UTP cable
LED Power/Link:Solid / Blinking / Off
Network Status:Blinking / Off
Buttons Linking button x 1
Change mode button x 1
Reset button x 1
Source interface HDMI A Type
Mounting Bracket VESA mounting bracket
Channel Switching DIP (16 channels)
Standards Conformance
Standards Compliance IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
IEEE 802.3ab 1000Base-T
IEEE 802.3af
Video Resolution (max.) Full HD (1920 x 1080)
WUXGA (1920 x 1200) @ 60 Hz
Security HDCP compliant
Audio HDMI with 2ch. audio (dts.)
Maximum Distance Point-to-Point / multi-cast, 100 meters 
Management Interfaces Web (LAN), Serial
System Expandability (max.) 16
Resolution Identification EDID (Extended Display Identification Data)
Environment Specifications
Operating Temperature: 0~50 degrees C
Relative Humidity: 0~90% (non-condensing)
Storage Temperature: -20~60 degrees C
Relative Humidity: 0~90% (non-condensing)
Power Supply 9~12V DC, 1.5A
Power Consumption 13.5W (each unit)
Dimensions (W x D x H) 130 x 96 x 25 mm
Weight 492 g
Emission FCC, CE
Ordering Information
IHD-200PR HDMI / Video Wall over IP Receiver with PoE
IHD-200PT HDMI / Video Wall over IP Transmitter with PoE