NMS-1000V
Universal Network Management Controller with LCD Touch Screen (10”/12”)
Overview
Universal Network Management Controller with LCD Touch Screen
PLANET's NMS-1000V Network Management controller can monitor all kinds of deployed network devices, such as managed switches, media converters, routers, smart APs, VoIP phones, IP cameras, etc., compliant with the SNMP Protocol, ONVIF Protocol and PLANET Smart Discovery utility. It thus enables the administrator to centrally manage a network of up to 1024 nodes from a central office, greatly boosting network and power management efficiency. Through the intuitive touch panel, any network exception messages can be displayed in real time to greatly improve the work efficiency of network management personnel. With its user authentication management, the NMS-1000V enhances data transmission security in the modern factory automation systems.
Watch Over Network within Minutes
The domain information web page presents a managed devices list and topology view, providing the at-a-glance and efficient summary of your management network. It lets you have a valuable information on the current wired and wireless network statuses via data-driven graphical charts. The topology viewer and event reports enable you to visualize the system usage and node status in real time so as to address whatever issue they may have.
User-friendly Setup Wizard
The NMS-1000V enhances user experience by providing more user-friendly wizard and obvious step-by-step guidance on each related function. Just like an app, it reduces training time and allows even non-technical users to be able to set up wireless network within minutes.
Interactive Dashboard Shows Network Statuses in an Instant
The NMS-1000V’s interactive dashboard includes local site network router, switch, access point statistics and WAN Traffic/PoE history graph. The administrator can quickly overview the device statuses as to whether or not they are online or offline. Through alert pop message window he can also find out system event on the touch panel, thus immediately knowing where the disconnection issue comes from.
Real-time Centralized Monitoring with Pop-up Alerts and E-mail Alarm Function
As the NMS-1000V can come out with a topology view of the network of the deployed powered devices, it enables to detect which device is online (Green) or offline (Red). The real-time centralized monitoring of these devices can help the administrator know what the current statuses of these devices are. Pop-up alerts shown on the touch panel tell where the problems are. The e-mail alarm function is designed to send an email alert to the administrator via the SMTP server where syslog information can be found once an abnormality is detected. This can prompt the administrator to quickly fix the identified problem in the network.
Optimizing Wi-Fi Deployment with Floor Maps
With the floor maps, devices can be located according to the field deployment, thus saving your time and cost of on-site support and monitoring. The current statuses of devices are shown in real time and the heat map is able to show the wireless signal coverage and strength to help the administrator fine-tune the overlapping of the adjacent devices anytime to optimize the wireless network performance.
HDMI Screen Synchronization Projection and Remote Login
The NMS-1000V supports HDMI interface that can easily connect to another bigger size screen, so that user can easily monitor the network more clearly. You can also use your other PC, laptop or tablet to monitor managed nodes on a DHCP-enabled network via Web browser, thus enabling you to manage the network anytime, anywhere.
Application
Economical Central Network Management Solution for SMBs
PLANET NMS-1000V helps service providers and IT managers control all PLANET network devices at the same time and enables administrator to effectively manage a local network of up to 1024 managed nodes simultaneously without having to purchase any license and hardware-based controller, and pay an expensive annual subscription fee.
The administrator can automatically discover and configure device profiles, batch provisioning/firmware upgrade, and built-in SAPC (Smart AP Control) that customize Wi-Fi planning against floor maps, and monitor all managed APs through a single Web-based interface. It allows operating across different platforms through virtualization software, which helps SMBs save costs on the need to configure the wireless APs one by one if done manually.
[Remarks]
Router: Log in to the router’s Web user interface and enable the SNMP function.
Switch: Log in to the switch’s Web user interface and enable the SNMP and LLDP function.
AP: Log in to the AP’s Web user interface to configure the AP to “Managed AP”. In support of SNMP AP, enable the SNMP function.
IP Cam: The ONVIF function is enabled by default.
Download
Datasheet
| Date | Version | Description | Download |
|---|---|---|---|
| 2020-08-21 | 1.0 | NMS-1000V |  |
Firmware
| Date | Version | Description | Download |
|---|---|---|---|
| 2020-06-24 | 1000V-10_v1.0b200529 | [NMS-1000V-10] Fixed SNMP sysObjectID. |
|
| 2020-06-05 | 1000V-10_v1.0b200518 | Initial release for NMS-1000V-10. | |
| 2020-06-05 | 1000V-12_v1.0b200514 | Initial release for NMS-1000V-12. | |
Quick Guide
| Date | Version | Description | Download |
|---|---|---|---|
| 2020-05-15 | 1.0 | Initial release. | |
User's Manual
| Date | Version | Description | Download |
|---|---|---|---|
| 2020-05-15 | 1.0 | Initial release for Configuration Guide. | |