FGSW-4840S

48-Port 10/100Mbps + 4G Web Smart Switch

Overview

High-Density / Cost-effective Network Connection Solution
The PLANET FGSW-4840S is a 10 / 100 / 1000Mbps Ethernet Switch that provides 48 10 / 100Base-TX Ports respectively with 2 10 / 100 / 1000Base-T ports and 2-SFP Mini-GBIC interfaces. The FGSW-4840S offers wire-speed packet transfer performance without risks of packet loss. The high data throughput of this device makes it ideal for most Gigabit environments, especially upgrading network to a Gigabit environment.

The 48 Fast Ethernet Ports and 2 Gigabit Ethernet ports support 10 / 100Mbps and 10 / 100 / 1000Mbps Auto-Negotiation for optimal speed detection through RJ-45 category 6, 5 or 5e cables. All the ports also support Auto-MDI / MDI-X that can detect the type of connection to any Ethernet device without requiring special straight or crossover cables. Moreover, the FGSW-4840S provides 2 SFP Mini-GBIC interfaces for fiber extension to uplink to a server or a network backbone as well.

Friendly / Advanced Web-Based Management
After configured IP address, the FGSW-4840S will shortly provide Smart management functions through the Web management interface. Functions such as per port speed, QoS settings, Trunking and port-based VLAN can be found in the friendly user interface of web browsers. The FGSW-4840S provides 802.1Q Tagged VLAN. The VLAN groups allowed on the FGSW-4840S will be maximally up to 256. And the FGSW-4840S also supports MTU VLAN (Multi-Tenant Unit VLAN) which means to the uplink ports and buildup several VLANs with each of the other ports. Each VLAN contains two ports, the uplink port and one of the other ports, in the FGSW-4840S, so the uplink port can communicate with any other ports but other ports can't communicate with each other. These features provide a cost-effective method to manage the devices from Internet whenever you are at work or at home.
Ordering Information
FGSW-4840S 48-Port 10/100Base-TX + 2-Port 1000Base-T Gigabit + 2-Port MiniGBIC(SFP) Web/Smart Switch

Application

Backbone Switch
With up to 17.6 Gigabits per second of non-blocking switch fabric, the switch can easily provide the high bandwidth for demands at present and in the future. Providing 48 Fast Ethernet ports with 2 Gigabit Ethernet ports and 2 SFP Mini-GBIC interfaces, the FGSW-4840S is ideal to be used as a server farm switch connecting to your servers and powerful desktops.

Department Switch
With 48 ports, the FGSW-4840S can connect up to 48 workstations in your Ethernet environment. The 4-Gigabit uplink to a department backbone via either 2 Gigabit ports or 2 SFP Mini-GBIC interfaces.

Ordering Information
FGSW-4840S 48-Port 10/100Base-TX + 2-Port 1000Base-T Gigabit + 2-Port MiniGBIC(SFP) Web/Smart Switch


Key Features

Physical Port
• 48-Port 10 / 100Mbps Ethernet ports RJ-45
• 2 10 / 100 / 1000Mbps Gigabit ports
• 2-SFP mini-GBIC interfaces

Layer 2 Features
• Complies with IEEE 802.3, 10Base-T, IEEE 802.3u, 100Base-TX and IEEE
　802.3ab, 1000Base-T, IEEE 802.3z, 1000Base-SX / LX Ethernet standard
• upports Auto-negotiation and half duplex / full duplex modes for
　all 10Base-T / 100Base-TX and 1000Base-T ports
• Auto-MDI / MDI-X detection for each RJ-45 port
• Prevents packet loss wtih back pressure (Half-Duplex) and IEEE 802.3x PAUSE
　frame flow control (Full-Duplex)
• High performance of Store-and-Forward architecture, broadcast storm control
　and runt / CRC filtering eliminate erroneous packets to optimize the network
　bandwidth
• 8K MAC address table, automatic source address learning and ageing
• Supports 256 IEEE 802.1Q Tagged based VLAN groups.
• Supports up to 8 Trunk groups, and each trunk group can be up to maximum ports
• Port Mirroring to monitor the incoming or outgoing traffic on a particular port
• Static MAC address and filtering MAC address management

Quality of Service
• 4 priority queues on all Switch ports.
• Supports QoS and bandwidth control on each port
• Supports IEEE 802.1p or Port-Based Priority mode

Security
• Port Security

Management
• WEB-based management
• Built-in Trivial File Transfer Protocol (TFTP) client
Ordering Information
FGSW-4840S 48-Port 10/100Base-TX + 2-Port 1000Base-T Gigabit + 2-Port MiniGBIC(SFP) Web/Smart Switch

Specification

Hardware Specification
10/100/Base-TX Ports 48 RJ-45 Auto-MDI/MDI-X ports
10/100/1000Base-T Ports 2 RJ-45 Auto-MDI/MDI-X ports
SFP Mini-GBIC Interfaces 2
Switch Processing Scheme Store-and-Forward
Switch fabric 17.6Gbps
Throughput (packet per second) 13Mbps
Address Table 8K entries
Share data Buffer 1536KBytes
Flow Control Back pressure for half duplex, IEEE 802.3x Pause Frame for full duplex
Dimensions (W x D x H) 440 x 260 x 44 mm, 1U height
Weight 3.4 kg
Power Requirement 100~240 VAC, 1.2A, 50-60 Hz
Power Consumption / Dissipation 24 Watts, 81 BTU/hr
Temperature Operating: 0~50 Degree C, Storage: -40~70 Degree C
Humidity Operating: 5~90%, Storage: 5~90% (Non-condensing)
Standards Conformance
Regulation Compliance FCC Part 15 Class A, CE
Standards Compliance IEEE 802.3 (Ethernet)
IEEE 802.3u (Fast Ethernet)
IEEE 802.3ab(Gigabit Ethernet)
IEEE 802.3z (Gigabit Ethernet)
IEEE 802.3x (Full-duplex flow control)
Ordering Information
FGSW-4840S 48-Port 10/100Base-TX + 2-Port 1000Base-T Gigabit + 2-Port MiniGBIC(SFP) Web/Smart Switch


Download

Datasheet

Date Version Description Download
2007-12-13 1.0 FGSW-4840S

Quick Guide

Date Version Description Download
2007-12-17 1.1 Quick Install Guide

User's Manual

Date Version Description Download
2007-12-25 2.1 Release for Hardware version 2.0.
Ordering Information
FGSW-4840S 48-Port 10/100Base-TX + 2-Port 1000Base-T Gigabit + 2-Port MiniGBIC(SFP) Web/Smart Switch