ISW-621 / ISW-621S15

4-Port 10/100Base-TX + 2-Port 100Base-FX Industrial Fast Ethernet Switch (-10~60 Degree C operate temperature)

 
 

Overview

New slim type with more practicability and convenience
PLANET releases the advanced industrial hardened Ethernet Switch with new slim type, IP-30 metal case: ISW-621 / ISW-621S15. Each of them equips with 4 10/100Base-TX Auto-negotiation ports. The ISW-621 has 2 100Base-FX multi-mode SC interfaces for transmission distance up to 2km, and the ISW-621S15 has 2 100Base-FX single-mode SC interfaces for transmission distance up to 15km, both of them operate reliably in Heavy Industrial demanding environments. Meanwhile, the compact, IP-30 standard metal case allows either DIN rail or wall mounting for efficient use of cabinet space.

Stable operate performance under difficult environments
The ISW-621 / ISW-621S15 provide a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb side traffic control cabinets. Being able to operate under the temperature range from -10 to 60 degree C, the ISW-621 / ISW-621S15 can be placed in almost any difficult environment. The ISW-621/ISW-621S15 also possess an integrated power supply source with wide range of voltages (12 to 48V DC) for worldwide high availability applications requiring dual or backup power inputs.

Robust Switch performance
The ISW-621 / ISW-621S15 each provides 4 10/100Base-TX Ethernet ports and 2 100Base-FX optic-fiber SC interfaces, and boasts a high performance switch architecture that is capable of providing non-blocking switch fabric and wire-speed throughput as high as 1Gbps. With 2K MAC Address table, they offer wire-speed packets transfer performance without risk of packet loss. The Flow Control function allows the ISW-621 / ISW-621S15 for fast and reliable data transfer.
All of the RJ-45 copper interfaces in the ISW-621 / ISW-621S15 support 10/100Mbps Auto-Negotiation for optimal speed detection through RJ-45 Category 3, 4 or 5 cables. The standard Auto-MDI/MDI-X support can detect the type of connection to any Ethernet device without requiring special straight or crossover cables. 
 
Ordering Information
ISW-621 4+2 100FX Port Multi-mode Industrial Ethernet Switch - 2km (-10~60 Degree C operate temperature)
ISW-621S15 4+2 100FX Port Single-mode Industrial Ethernet Switch - 15km (-10~60 Degree C operate temperature)

Application

Industrial area Switch for data collect and forward
The ISW-621 / ISW-621S15 equip with 4 10/100Mbps ports that offers auto MDI / MDIX feature, 2 100Base-FX optic-fiber SC interfaces, 1.2Gps non-blocking switch fabric, and the 2K MAC Address table so that they can perform wire-speed packets transfer without risk of packet loss. The ISW-621 / ISW-621S15 with the slim type IP 30 metal shape is ideal for most Heavy Industrial demanding environments. 
 
 
Ordering Information
ISW-621 4+2 100FX Port Multi-mode Industrial Ethernet Switch - 2km (-10~60 Degree C operate temperature)
ISW-621S15 4+2 100FX Port Single-mode Industrial Ethernet Switch - 15km (-10~60 Degree C operate temperature)

Key Features

• Physical Port
　–4-Port 10/100Base-TX RJ-45 with auto MDI/MDI-X function
　–2-Port 100Base-FX interfaces for up to 2km (Multi-mode fiber 50µm/125µm) on ISW-621
　–2-Port 100Base-FX interfaces for up to 15km (Single-mode fiber 9µm/125µm) on ISW-
　　621S15

• Layer 2 Features
　–Complies with IEEE 802.3, IEEE 802.3u 10/100Base-TX, 100Base-FX Ethernet standard
　–Supports Auto-negotiation and 10/100Mbps half / full duplex mode for each copper 
　　port
　–High performance Store and Forward architecture, broadcast storm control, runt/CRC 
　　filtering eliminates erroneous packets to optimize the network bandwidth
　–Prevents packet loss with back pressure (Half-Duplex) and IEEE 802.3x PAUSE frame 
　　flow control (Full-Duplex)
　–Backplane (Switching Fabric): 1.2Gbps
　–Integrated address look-up engine, support 2K absolute MAC addresses
　–1 Mbit on-chip frame buffer
　–Automatic address learning and address aging
　–CSMA/CD Protocol

• Industrial Case / Installation
　–IP-30 Metal case / Protection
　–DIN Rail and Wall Mount Design
　–12 to 48V DC, redundant power with polarity reverse protect function and 
　　connective removable terminal block for master and slave power
　–Supports EFT protection 6000 VDC for power line 
　–Supports 6000 VDC Ethernet ESD protection
　–-10 to 60 Degree C operation temperature
 
Ordering Information
ISW-621 4+2 100FX Port Multi-mode Industrial Ethernet Switch - 2km (-10~60 Degree C operate temperature)
ISW-621S15 4+2 100FX Port Single-mode Industrial Ethernet Switch - 15km (-10~60 Degree C operate temperature)

Specification

Hardware Specification
Copper Ports
4 x 10/100Base-TX, Auto-negotiation, Auto-MDI/MDI-X

Cable
10Base-T : 2-pair UTP Cat. 3, 4, 5cable (100meters, max.)
100Base-TX : 2-pair UTP Cat. 5cable (100meters, max.)
Optical Port
2 x 100Base-FX

Cable
ISW-621: 50/125μm fiber 
ISW-621S15: 9/125μm fiber 

Mode
ISW-621: Multi-mode
ISW-621S15: Single-mode

Distance
ISW-621: 2km
ISW-621S15: 15km

Frequency
ISW-621: 1300nm
ISW-621S15: 1310nm

Launch Power
ISW-621: Max. -14dBm, Min. -19dBm
ISW-621S15: Max. -7dBm, Min. -20dBm

Receive Sensitivity
ISW-621: -34.5dBm
ISW-621S15: -28dBm

Max. Input Power 
ISW-621: -14dBm
ISW-621S15: -8dBm
Dimension (W x D x H) 135 x 97 x 32 mm
Weight 442g
Power Requirement 12~48 VDC, 
Redundant power with polarity reverse protection function
Power Consumption / Dissipation Max. 11.6 Watts / 40BTU
Installation DIN rail kit / wall mount ear
Alarm Provides one relay output for power fail
Alarm Relay current carry ability: 1A @ DC 24V
Switch Specification
Switch Processing Scheme Store-and-Forward
Address Table 2K entries
Buffer 1Mbit
Flow Control Back pressure for half duplex,
IEEE 802.3x Pause Frame for full duplex
Switch Fabric 1.2Gbps
Throughput (Packet Per Second) 0.89Mpps @ 64Bytes
Standards Conformance
Standards Compliance IEEE 802.3 Ethernet, 10Base-T
IEEE 802.3u Fast Ethernet, 100Base-TX, 100Base-FX
IEEE 802.3x Full-duplex flow control
Temperature Operating: -10~60 Degree C
Storage: -40~85 Degree C
Humidity Operating Operating: 5~90%, 
Storage: 5~90% (Non-condensing)
Regulation Compliance FCC Part 15 Class A, CE
Safety UL, cUL
Stability Testing IEC60068-2-32(Free fall),
IEC60068-2-27(Shock), 
IEC60068-2-6(Vibration)

Ordering Information
ISW-621 4+2 100FX Port Multi-mode Industrial Ethernet Switch - 2km (-10~60 Degree C operate temperature)
ISW-621S15 4+2 100FX Port Single-mode Industrial Ethernet Switch - 15km (-10~60 Degree C operate temperature)

Download

Datasheet

Date Version Description Download
2009-03-11 1.0 ISW-621 / ISW-621S15

User's Manual

Date Version Description Download
2009-03-04 1.3 Add ISW-621TF.

EC Declaration

Date Version Description Download
2012-08-14 1.0 EC Declaration
Ordering Information
ISW-621 4+2 100FX Port Multi-mode Industrial Ethernet Switch - 2km (-10~60 Degree C operate temperature)
ISW-621S15 4+2 100FX Port Single-mode Industrial Ethernet Switch - 15km (-10~60 Degree C operate temperature)

Related Products

Photo Model Description
ISW-511 / ISW-511S15 4-Port 10/100Base-TX + 1-Port 100Base-FX Industrial Fast Ethernet Switch (-10~60 Degree C operate temperature)

Ordering Information
ISW-621 4+2 100FX Port Multi-mode Industrial Ethernet Switch - 2km (-10~60 Degree C operate temperature)
ISW-621S15 4+2 100FX Port Single-mode Industrial Ethernet Switch - 15km (-10~60 Degree C operate temperature)